Disassembly & Reassembly - Samsung 510N Service Manual

3 Disassembly and Reassembly

3-1 Disassembly

Cautions:1. Disconnect the monitor from the power source before disassembly.

After placing monitor on the cushioned table,

remove two screws on the left and right of the

bottom.

Disconnect back cover from monitor after

grabbing the right edge of the set (a) and

lifting the stand((2)).

Remove 2 screws from the shield.

Disconnect function cable from the cover front

and lift up the panel. Remove 4 screws from

the panel shield. (Right / Left)

Lift up the panel shield and carefully remove

the silicon glue on the cables with a nipper.

Caution : Lamp wire may be easily

damaged. Please use caution when removing

the silicon.

MJ15AS*/MJ17AS*/MJ19AS*/

3-1

MJ15BS*/MJ17BS*/MJ19BS*