Quick Links
2 1
Cal. 4210.B
2 1
Cal. 4210.B
2 1
English
Cal. 4210.B
User's Manual
English
For model
User's Manual
504 + 506
Description of the display and control buttons
English
Description of the display and control buttons
User's Manual
Display elements
4210.B
Display elements
4210.B
Date
Description of the display and control buttons
Date
Minute hand
Minute hand
2 1
Hour hand
2 1
Hour hand
Display elements
4210.B
Second hand
Second hand
Date
Small
Minute hand
Small
2 1
hour hand
hour hand
Hour hand
Small
Small
Second hand
minute hand
minute hand
Small
hour hand
Small
Control buttons
minute hand
Control buttons
Push-button
Push-button
Control buttons
Crown
Crown
Push-button
Crown
nd
Setting the 2
time zone
Setting the 2
nd
time zone
Setting the 2
nd
time zone
4210.B
4210.B
4210.B
2 1
2 1
2 1
4210.B Second
4220.B
Small second
2 1
4210.B Second
4220.B
Small second
2 1
I
II
4210.B Second
4220.B
Small second
2 1
2 1
I
II
III
2 1
2 1
I
II
2 1
I
II
2 1
2 1
2 1
I
II
III
2 1
1 7
Crown
I
II
2 1
I
II
1 7
Crown
1 7
4210.B
Date pos. 12h
0 3
I
II
Crown
1 7
1 7
I
II
0 3
4220.B
4210.B
Date pos. 6h
Date pos. 12h
0 3
I
II
1 7
I
II
4210.B
0 3
Date pos. 12h
4220.B
0 3
Date pos. 6h
User Manual Dual Time model 504 + 506
I
II
0 3
All manuals and user guides at all-guidesbox.com
Cal. 4220.B
Cal. 4220.B
2 1
2 1
Cal. 4220.B
2 1
Display elements
4220.B
Display elements
4220.B
Minute hand
Minute hand
Hour hand
Hour hand
Small
Small
Display elements
4220.B
hour hand
hour hand
Minute hand
Small
Small
Hour hand
minute hand
minute hand
Small
Second hand
Second hand
hour hand
2 1
2 1
Small
Date
Date
minute hand
Second hand
2 1
Control buttons
Date
Control buttons
Push-button
Push-button
Control buttons
Crown
Crown
Push-button
Crown
4220.B
4220.B
4220.B
Cal. 5030.D
2 1
2 1
English
User's Manual
2 1
nd
2
time zone
2
nd
time zone
Description of the display and control buttons
nd
2
time zone
Display elements
Setting the time
Second hand
Setting the time
*Pull out the crown to position III
Minute hand
(the watch stops).
Hour hand
*Pull out the crown to position III
III
Centre stop-second
Setting the time
(the watch stops).
Turn the crown until you reach the correct
Minute counter
time 8:45.
Hour counter
*Pull out the crown to position III
Turn the crown until you reach the correct
(the watch stops).
Date
*Push the crown back into position I.
time 8:45.
Please note:
III
* In order to set the time to the exact second,
Turn the crown until you reach the correct
*Push the crown back into position I.
must be pulled out when the second
III
time 8:45.
hand is in position «60».
Minute counter
Once the hour and minute hands have been
set,
must be pushed back into position I
Please note:
at the exact second.
* In order to set the time to the exact second,
*Push the crown back into position I.
must be pulled out when the second
hand is in position «60».
Once the hour and minute hands have been
set,
Please note:
must be pushed back into position I
Setting the date/time
at the exact second.
* In order to set the time to the exact second,
Hour counter
must be pulled out when the second
Example:
III
hand is in position «60».
– Date / time on the watch:
/ 1:25 AM
17
– Present date / time:
Once the hour and minute hands have been
/ 8:30 PM
04
set,
must be pushed back into position I
Pull out the crown to position II
Setting the date/time
at the exact second.
(the watch continues to run).
Example:
– Date / time on the watch:
/ 1:25 AM
Turn the crown until yesterday's date
17
– Present date / time:
appears
/ 8:30 PM
03
04
Setting the date/time
Pull out the crown to position II
Minute counter
(the watch continues to run).
Example:
– Date / time on the watch:
/ 1:25 AM
17
– Present date / time:
/ 8:30 PM
04
Turn the crown until yesterday's date
appears
03
Pull out the crown to position II
(the watch continues to run).
Hour counter
Turn the crown until yesterday's date
appears
03
Ronda aG
CH-4415 Lausen/Switzerland
Ronda aG
www.ronda-startech.com
CH-4415 Lausen/Switzerland
www.ronda-startech.com
Ronda aG
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
CH-4415 Lausen/Switzerland
Accuracy: +20 / -10 seconds per month
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
www.ronda-startech.com
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Any 2nd time zone can be set using the small
hour hand and small minute hand.
Any 2nd time zone can be set using the small
Any 2nd time zone can be set using the small
hour hand and small minute hand.
hour hand and small minute hand.
Activation: Press the push button for at
Activation: Press the push button for at
least 2 seconds.
Activation: Press the push button for at
least 2 seconds.
As soon as the samll minute hand
least 2 seconds.
As soon as the samll minute hand
jumps forward one minute, this mode
As soon as the samll minute hand
jumps forward one minute, this mode
of operation is activated.
of operation is activated.
jumps forward one minute, this mode
of operation is activated.
Brief pressing: (less than 1 second)
Brief pressing: (less than 1 second)
Moves forward individual minutes.
Moves forward individual minutes.
Brief pressing: (less than 1 second)
Medium pressing: (1 to 2 second)
Medium pressing: (1 to 2 second)
Moves forward individual minutes.
Moves forward 1 hour.
Moves forward 1 hour.
Long pressing (longer than 2 seconds)
Medium pressing: (1 to 2 second)
Long pressing (longer than 2 seconds)
The time zone is moved forward until the
Moves forward 1 hour.
The time zone is moved forward until the
push button is released.
push button is released.
Long pressing (longer than 2 seconds)
Please Note
The time zone is moved forward until the
If the push button is not pushed for ten
Please Note
seconds, the setting mode is deactivated.
push button is released.
If the push button is not pushed for ten
Please see point no
for activation.
seconds, the setting mode is deactivated.
Please Note
Please see point no
for activation.
If the push button is not pushed for ten
seconds, the setting mode is deactivated.
Control buttons
Please see point no
4210.B
Setting the date (quick mode)
for activation.
Date pos. 12h
3 1
4210.B
Pull out the crown to position II (the watch
Push button A
continues to run).
Date pos. 12h
3 1
Crown
Turn the crown until the correct
I
II
4210.B
date
01
Push button B
Date pos. 12h
3 1
4220.B
3 1
Push the crown back into position I.
Date pos. 6h
I
II
Please note:
3 1
0 1
4220.B
During the date changing phase between
Date pos. 6h
9 PM and 12 PM; the date must be set to the
I
date of the following day.
An extreme acceleration in setting the date
3 1
I
II
0 1
with quick mode can induce a false date indi-
4220.B
Chronograph:
Push-button A
cation. The synchronization is re-established
0 1
Date pos. 6h
by setting the date from 01 till 31 (crown in
Accumulated timing
position II).
Example:
Start: (start timing)
0 1
I
II
Stop: (e.g. 15 min
5 sec following
Restart: (timing is resumed)
0 1
4210.B Second
4220.B
*
Stop:
(e.g. 13 min
5 sec following
Small second
=
28 min 10 sec
0 3
* Pull out the crown to position III
(The accumulated measured time is shown)
I
(the watch stops).
Reset:
The three chronograph hands are returned
Turn the crown until the correct date
0 1
to their zero positions.
I
II
III
appears.
04
4210.B Second
4220.B
Please note:
0 3
Small second
**Continue to turn the crown until the
* Following
, the accumulation of the
0 3
correct time 8:30 PM appears.
timing can be continued by pressing push-
button A
(Restart / Stop, Restart / Stop, ...)
Push the crown back into position I.
Push-button B
0 4
4210.B Second
4220.B
I
II
III
Small second
Adjusting the chronograph
Center
0 3
0 3
Please note:
stop-second
hands to zero position
I
II
III
* To set your watch to the exact second,
please refer to the chapter entitled «set-
Example:
0 4
ting the time».
One or several chronograph hands are not in
** Please observe the AM/PM clock rhythm.
their correct zero positions and have to be
adjusted (e.g. following a battery change).
I
II
III
0 4
I
Pull out the crown to position III (all 3
chronograph hands are in their correct or
0 3
incorrect zero position).
Push-button A
I
II
III
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
0 4
(the centre stop-second rotates by
0 4
360°
corrective mode is activated).
III
Push-button B
See more: www.christinadesignlondon.com
I
0 4
Setting the time
Second hand
Ronda aG
CH-4415 Lausen/Switzerland
www.ronda-startech.com
Battery type: 395 (diameter 9.5mm x 2.6mm / SR 927 SW)
Accuracy: +20 / -10 seconds per month
In case your watch needs to be repaired or to raise claims
under a guarantee, please contact the point of sales
Minute counter
Push-button A
Setting the date (quick mode)
Hour counter
Pull out the crown to position II (the watch
Setting the date (quick mode)
continues to run).
appears.
Turn the crown until the correct
Pull out the crown to position II (the watch
date
appears.
01
continues to run).
Push the crown back into position I.
Push-button B
Turn the crown until the correct
II
date
appears.
01
Please note:
During the date changing phase between
Minute counter
Push-button A
Push the crown back into position I.
9 PM and 12 PM; the date must be set to the
date of the following day.
An extreme acceleration in setting the date
Please note:
with quick mode can induce a false date indi-
)
During the date changing phase between
cation. The synchronization is re-established
9 PM and 12 PM; the date must be set to the
by setting the date from 01 till 31 (crown in
)
date of the following day.
position II).
Hour counter
Push-button B
An extreme acceleration in setting the date
II
with quick mode can induce a false date indi-
cation. The synchronization is re-established
by setting the date from 01 till 31 (crown in
position II).
* Pull out the crown to position III
(the watch stops).
Push-button B
Turn the crown until the correct date
appears.
04
A
Adjusting the centre stop second
**Continue to turn the crown until the
* Pull out the crown to position III
Single step
correct time 8:30 PM appears.
Continuous
(the watch stops).
B
Adjusting the next hand B
Push the crown back into position I.
Turn the crown until the correct date
A
Adjusting the hour counter hand (position 6h
appears.
II
III
04
Single step
Continuous
**Continue to turn the crown until the
correct time 8:30 PM appears.
Adjusting the next hand B
B
Please note:
* To set your watch to the exact second,
Adjusting the minute counter hand (position
A
Push the crown back into position I.
Single step
please refer to the chapter entitled «set-
Continuous
ting the time».
** Please observe the AM/PM clock rhythm.
Returning the crown to position I
I
II
III
Termination of the chronograph hands adjustment
(can be carried out at any time).
Please note:
II
III
* To set your watch to the exact second,
please refer to the chapter entitled «set-
ting the time».
Chronograph: Basic function
(Start / Stop / Reset)
Example:
Start: Press push-button A.
Stop:
to stop the timing, press push-
button A once more and read the three
1h / 20min / 10 se
chronograph hands:
Zero positioning:
Press push-button B.
(The three chronograph hands will be re
to their zero positions).
Chronograph:
Intermediate or interval timin
Example:
Start: (start timing)
Display interval:
e.g. 10 minutes 10 seconds (timing
continues in the background)
*
Making up the measured time:
(the 3 chronograph hands are quickly
advanced to the ongoing measured tim
Stop: (Final time is displayed)
Reset:
The 3 chronograph hands are returned t
their zero position
Please note:
* Following
, further intervals or inter-
mediates can be displayed by pressing
push-button B (display interval / make u
measured time, ...)
A
1 x short
A
long
A
1 x short
A
long
A
1 x short
A
long
Setting the date (quick mode
