Table of Contents
5.
Remove the protective film covering the screens
and the camera lens before using the phone.
Switch on the phone
To switch on the phone, press the
PIN code if required (i.e. the 4 to 8-digit secret code
of your SIM card). It is preconfigured and
communicated to you by your operator or retailer. To
personalise the PIN code, see page 43.
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then set the time.
2
)
key. Enter the
For complete date and time options, see page 46.
Copy the SIM phonebook
If at first switch on, if you do not copy the SIM
phonebook, see "Contacts select" page 19.
The mobile phone detects a SIM card that already
contains names and a message asks you if you want to
copy your SIM phonebook onto the built-in
c
phonebook. Press
The phone phonebook is always set as your default
phonebook. To switch back to the SIM phonebook,
see "Contacts select" page 19.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low. If the battery is
completely flat, it will take 2 or 3 minutes of charging
for its icon to reappear.
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1.
Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
,
to cancel or
to accept.
Getting started
Table of Contents
