Table of Contents
Settings
This is a guide book specific to system upgrading. Please refer to the operating instructions for basic operations,
menu operations, specifications, etc.
USER
SCREEN
AUDIO
19
NAVI SETUP
Navigation Setting
NAVI SP
BOTH
: Front Left/Right speaker
: Front Left only
L ch
R ch
: Front Right only
NAVI MUTE
Preparation: Connect the navi mute lead.
OFF
: unchanged
LEV 1
: –20 dB
LEV 2
: –30 dB
LEV 3
: no sound
Note:
¡ You can set the navigation mute level when
selected on
NAVI INPUT
NAVI VOLUME
Volume adjustment of the car navigation system.
]
[
: down,
: up
20
CQ-VD7005N
INPUT/OUTPUT
DVD
(Navigation set up)
(Navigation Speaker)
default:
BOTH
(Navigation mute level)
default:
LEV 1
RGB
(navigation input) .
(Navigation Volume)
Setting range: 0 to 40
default: 20
INPUT SELECT
RADIO
Input selection
NAVI INPUT
RGB
AV1
CH VIDEO INPUT
ON
OFF
Note:
¡The audio output should be connected to the AV2-IN .
CAMERA
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. (
Instructions)
ON
is
OFF
Note:
¡Make sure to select
connected.
¡The image from the rear view camera may be blurred
in the night or a dark place.
(Navigation Input)
: connected to the RGB input cord, or a
car navigation system not connected
: connected to the AV1-IN
(Video input for DVD Changer)
: connected to the AV2-IN
: unconnected
(Rear view camera set up)
a
: connected to the CAMERA-IN
: unconnected
when no rear view camera is
OFF
default:
RGB
default:
OFF
Installation
default:
OFF
Chapters
Table of Contents
Troubleshooting
