Stacking Kit Installation - LG DLE2140 Series Owner's Manual
Hide thumbs
Also See for DLE2140 Series:
- Specifications (2 pages) ,
- Owner's manual (124 pages) ,
- Owner's manual (124 pages)
Table of Contents
Available languages
Available languages
OPTIONALACCESSORIES
STACKING KIT iNSTALLATiON
This stacking
kit includes:
= Two (2) side rails
= One (1) front rail
• Four (4) screws
f
TOOLS Needed
for Installation:
= Phillips-head
screwdriver
To ensure safe and secure installation, please
observe the following instructions.
WARNING
= incorrect installation can cause serious
accidents.
= The weight of the dryer and the height of
installation make this stacking
procedure
too
risky for one person. Two or more people are
required when installing the stacking
kit.
There is a risk of serious back injury or other
injuries.
• Do not use the stacking
kit with a gas dryer
in potentially
unstable conditions
such as a
mobile home. Failure to follow this warning can
result in serious injury.
Place the washer on a solid, stable, level
floor capable
of supporting
the weight of
both appliances.
Failure to follow this warning
can result in serious injury.
if appliances
are already installed,
disconnect
them from all power, water,
or gas lines and from draining
or venting
connections.
Failure to do so can result
in electrical shock, fire, explosion, or death.
Make sure the surface of the washer is clean
and dry. Remove paper backing from the
tape on one of the stacking kit side brackets.
top as _hdoewbr?Ckthtet°bhveSlldues_rfa_oenT_ish_
press the adhesive area of the bracket to the
washer surface. Secure the side bracket to
the washer with a screw on the back side of
the bracket. Repeat steps 1 and 2 to attach
the other side bracket.
59
MFL62512832
EN 100720.indd
39
7/21/10
1:56:13PM
Chapters
Table of Contents
