Symptoms caused by the VTR used
According to the VTR used, the following symptoms will
appear. They are neither failures of the RM-E700 nor the
VTR used.
Recording mode indication
Counter. indication
'Tape transportation during
program editing or program
previewing
Frame-by-frame playback
'Double speed playback
| When the VTR is in the recording mode, BI appears
in the display window of the RM-E700.
When the VTR plays back a tape recorded in the LP
mode, the counter shows half of the actual playback
time. Therefore, the total lap time is also half of the
actual lap time.
When the counter shows a minus count, the count of
the VTR is 1 second different from that of the
RM-E700.
When the MOVE MODE selector is set to CUE/REV,
the tape moves by repeating cue/review and playback
pause alternately. To avoid this, we recommend
setting the MOVE MODE selector to FF/REW.
When the VTR is connected to the CONTROL L
connector of the RM-E700, the picture is played back
one frame with every push of the FRAME button. The
playback pause indications (B®, PAUSE) appear in
the display window of the RM-E700.
When the VTR is connected to the CONTROL L
connector of the RM-E700,
and you press the X2
button of the RM-E700,
the STOP indication appears
in the display window. However, the VTR enters the
playback mode, as the VTR has no X2 function.
SLV-801, SLV-802, SLV-201,
SLV-201F, SLV-202
CCD-F30, CCD-F40, CCD-V9,
CCD-F330E, CCD-F340E, CCD-
FS0E
The model with time counter (H:M:S
counter) and frame indication
SL-HF 1000, EDV-9500
EV-C3, EV-P2
SLV-402
SLV-802
51
