Table of Contents
Both sides*
I
Q
The E> (for front side) or <<] (for
reverse side) indicator lights steadily to
show you which side will start
recording. The other indicator flashes for
a few seconds, then disappears.
10
Press p> on the CD player.
The CD player starts playing.
To
Press
Stop recording
Mion the deck B
Pause recording
PAUSE {if on the
deck B
But this control will change the sound
levels you hear through speakers or
headphones.
2
ey
Recording a CD:
Selecting Tape Length
Automatically (tape
select edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each disc automatically.
You cannot use Tape Select Edit for discs
which contain 21 tracks or more.
~
POWER—ON
vib
wv
1 Press OPEN/CLOSE & on the CD -
player and place a CD on the tray. Then
press OPEN/CLOSE @ again to close
the tray. If necessary, press DISC SKIP
on the remote commander to choose a
CD.
The total number of tracks and total
playing time appear in the display.
2 Press EDIT.
"EDIT" appears in the display, and the
player divides the tracks automatically.
Then the display changes as follows:
3 Insert a blank tape of the indicated tape
length (or a longer tape) into deck B.
4 select dual or single-sided recording.
To record
Set DIRECTION to
One side
=
Both sides*
cD
*
Recording always stops at the end of
the reverse side. Be sure to start from
the front side.
:
5 when you want to reduce the hiss noise
in low-level high-frequency signals, set
DOLBY NR to ON.
6 Press CD SYNCHRO.
Deck B stands by for recording.
7 Press PAUSE
(if) on the tape player to
release recording pause.
Recording starts.
To
Press
Stop recording
]
Resume play
CONTINUE
Note
"C - - -" appears when the required tape
length exceeds 90 minutes.
Chapter 4: the Tape Player
Table of Contents
