Table of Contents
Frame advance
PAUSE button
FRAME ADVANCE
button
—
Repeat function
PLAY
button
REPEAT button
viewed during playback.
12
REMOTE OPERATION
You
can operate the VTR
from a distance using the
Infrared Remote Control unit which performs the same
functions as the corresponding buttons on the VTR —
except for its REMOTE
ON/OFF
switch, TIMER
SET
and RECORD buttons.
Power source of infrared remote control unit
The infrared remote control unit is powered by two bat-
teries (size IEC standard R6).
The life of the batteries is
about a year although it depends on the numbers of
times the unit is used.
Replace
the batteries when
operation is not possible or when the distance becomes
too small.
Operation of remote control
To use the infrared
remote
control unit aim it at the
receiver on the front panel of the VTR and set REMOTE
ON/OFF switch to ON.
REMOTE
ON/OFF switch
TIMER SET buttons
RECORD buitens
Notes:
1. See the supplement manual for more information on
using TIMER SET buttons.
2. Press
RECORD
buttons
simultaneously
on
the
remote control unit to record.
3. The
infrared
rays
will
bounce
off the
walls
and
eventually
reach the receiver on the VTR,
but for
best results transmit rays directly to the receiver.
Table of Contents
