Table of Contents
Radio Operation
Listening to the radio
1. Press F on the remote control or F on the unit until FM appears on the display window. The last received
station is tuned in.
2. Auto tuning: Press TUNING -/+ (C/V) on the remote control or TUNING (Y/U) on the unit
for about 1 second until the frequency indication starts changing, then release. Scanning stops when the
unit tunes in a station.
Manual tuning: Press TUNING -/+ (C/V) on the remote control or TUNING (Y/U) on the
unit repeatedly.
3. Adjust the volume by using VOL +/- on the remote control or VOLUME +/- on the unit.
, Note
y Before tuning, make sure to turn down the volume.
y To improve poor FM reception, press d/M on the remote control. This will change the tuner from stereo to
mono and usually improve the reception.
Presetting Radio Station
1. Press F on the remote control or F on the unit until FM appears on the display window.
2. Select the desired frequency by pressing TUNING -/+ (C/V) on the remote control or TUNING
(Y/U) on the unit.
3. Press PROGRAM/MEMORY. After a preset number will blink in the display window, press PROGRAM/
MEMORY again. The station is saved.
4. Repeat steps 2 to 3 to store other stations. You can preset up to 50 stations for FM.
5. To listen a preset station, press PRESET/FOLDER W/S.
Deleting a saved Preset station
1. Select a desired preset by pressing PRESET/FOLDER W/S and press DELETE on the remote control.
2. The selected preset number will be blinked.
3. Press DELETE on the remote control to erase the saved preset number.
, Note
DELETE
Press and hold
LH64B_LH62B_LH64G_LH62G.AINDLLK_ENG.indd 9
to erase all saved radio stations. "ERASE" will flash up. Press
FM antenna
DELETE
Operation
9
again.
2016-06-30
3
4:05:21
Table of Contents
