Related Manuals for Haier HWM120-B1678S8
Summary of Contents for Haier HWM120-B1678S8
- Page 1 TOP LOAD FULLY AUTOMATIC WASHING MACHINE USER MANUAL MODEL HWM120-B1678S8 HWM140-B1678S8 Please read this manual carefully before operating your washing machine and retain 0030512583 it for future reference.
-
Page 2: Table Of Contents
CONTENTS Product overview Safety precautions Description of symbols Warning Forbidden Safety warning Installation & adjustment Install the bottom plate Balance washing machine Change the direction of the drain hose Position the drain hose Inlet pipe connection Before washing Laundry Guidelines Operation Loading the appliance Adding Detergent... -
Page 3: Product Overview
Product overview Top lid component Control panel Detergent Drawer Inner tub Control panel seat Lint filter (2 pieces) Pulsator Cabinet Adjustable foot Base frame (2 pieces) Water inlet valve Hook Handle Back cover (2 pieces) Drain hose Power cord Fixed foot (2 pieces) Appearance and accessories may change without notice for product improvement. -
Page 4: Safety Precautions
Safety precautions Description of symbols Contents marked with this symbol are related to the safety Warning sign information of the products. Please operate in accordance to the contents of this manual, to prevent personal injury or property damage. Contents marked with this symbol indicates operations or actions Forbidden sign that should not be undertaken by the user. - Page 5 Safety precautions Forbidden Do not install this appliance in a Do not contact to damp or wet environment. Do not water exceed 50°C leave wet laundry on the Control in temperature. Panel or spray water directly on to this appliance as this may cause the washer to malfunction or cause an electrical fault.
- Page 6 Safety precautions Safety warning You may not open the lid when the water is filling in the tub.The new water inlet hose supplied with the appliance is to be used and the old water inlet hose should not be reused. Please remove item such as coins, Check that water tap is open after button, sand and other solid materials...
-
Page 7: Installation & Adjustment
If the floor is not level, use the adjustable feet to adjust it. Keep the machine at 20mm from each adjacent wall. 2° Change the direction of the drain hose Lay the machine on a flat and clean floor. Relocate the drain pipe in a diagonal direction if required. Applicable model: HWM120-B1678S8... -
Page 8: Position The Drain Hose
Installation & Adjustment Position the drain hose 1.Do not let the drain hose run over 4.If extra drain hose is needed, please doorsills that protrude 10cm from the make separate purchase.The inner floor. diameter of the extra hose shall not less than 30mm,and the length shall not exceed 1.5m. - Page 9 Installation & Adjustment Connection between the water inlet hose jointer and the water tap 1.Press the lower end of the locking lever and push down the slider. Remove the water inlet hose jointer from the water inlet hose component. See Figure 1. 2.Remove the nameplate.
- Page 10 Installation & Adjustment Connection between the jointer of the water inlet hose and the water inlet hose 1.Push down the slider. Insert the water inlet hose into the jointer. the jointer of the 2.Connect the locking lever to the jointer. Release water inlet hose the slider with a clicking sound.
-
Page 11: Before Washing
Before washing Preparation before washing 1.Connect the jointer of the water inlet hose to the water tap.Turn on the water tap. 2.The washing machine must be properly grounded. Then plug in the power cord to the power socket. Do not ground the washing machine to a gas pipe, water pipe or telephone line. -
Page 12: Operation
Operation Loading the appliance The washing capacity refers to the maximum dry weight of laundry that could be loaded into the appliance. The thickness, size and type of fabrics will influence the actual capacity. For laundries less than 2.0kg, kindly select the water level at Low. -
Page 13: Control Panel
Control Panel Explanation of buttons Soft Wash Tub Clean Indicator display On:Indicates the program is about to run and indicates the seleced cycle and options Flashing:Indicates the program is running and indicates the selected cycle and options Remaining time display Displays total time remaining during current,in progress wash cycle Displays remaining time when the “Delay”program is used(hours) Displays error codes (see page 16) - Page 14 Control Panel Press the “Power” button to switch on/off the washing machine. IThe washing machine will switch off automatically if the “Start/Pause” button is not press within 10 minutes. The function is intended for children safety and preventing children change the washing program.
- Page 15 Control Panel Soak Time is applicable to all programs except Express, Wool, Soft Wash, Tub Dry and Tub Clean.Rinse count is applicable to all program except Soft Wash, Tub Dry and Tub Clean. Spin Time is applicable to all program except Soft Wash, Tub Dry and Tub Clean. You may choose different washing cycle by pressing the Progress button for Cotton, Eco, Sports, Heavy, Delicate, Towels and Baby Care program.
- Page 16 Control Panel Separate colour from white before loading machine. During the Rinse cycle, only Spin time could be adjusted. The rest of the cycles will be locked. After choosing the Tub Clean program, the rest of the cycles and settings are not functioning. The machine runs the Tub clean program Fuzzy logic runs automatically for Cotton and Eco program.
-
Page 17: Cleaning And Maintenance
Cleaning and Maintenance Maintenance Unplug the washing machine before carry out any cleaning and maintenance to avoid the risk of electric shock. Clean the lint filter(s) and detergent drawer after each wash,otherwise it may influence your next use. The lint filter must be used during washing. Clean the detergent drawer and install back to the original position. -
Page 18: Troubleshooting
Troubleshooting If there is a fault or the machine doesn’t operate correctly, kindly refer to the diagnostic list below first. It is recommended to read the list below before reach to our customer care team.Please contact our customer care team if a repair is needed. Please do not attempt to fix the machine by yourself. -
Page 19: Common Occurrence
Troubleshooting Problem Possible causes What to do The water tap leakage. Is the water inlet hose loose? Fasten the inlet hose. Please contact Customer Is the door lock broken? The display shows E8. Care. Communication failure Please contact Customer The display shows E9. between display board and Care. -
Page 20: Packing List
Warranty card Inside the document bag Screw Inside accessory bag Components of the water inlet hose faucet Specification Type Fully Automatic Washing Machine Model HWM120-B1678S8 HWM140-B1678S8 Rated voltage/frequency 220V-240V~/50Hz 220V-240V~/50Hz 500W Rated washing power 560W Rated spinning power 360W 350W...