Removal And Replacement Procedures For Authorized Service Provider Parts; Component Replacement Procedures; Bottom Cover - HP Pavilion 15 Maintenance And Service Manual
Hide thumbs
Also See for Pavilion 15:
- Maintenance and service manual (141 pages) ,
- Maintenance and service manual (133 pages) ,
- Maintenance and service manual (148 pages)
Table of Contents
5
Removal and replacement procedures for
Authorized Service Provider parts
This chapter provides removal and replacement procedures for Authorized Service Provider only parts.
CAUTION:
Accessing these parts can damage the computer or void the warranty.
CAUTION:
described here. Accessing the internal part could damage the computer or void the warranty.
Component replacement procedures
NOTE:
Details about your computer, including model, serial number, product key, and length of warranty, are
on the service tag at the bottom of your computer. See
NOTE:
HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow
the on-screen instructions.
There are as many as 60 screws that must be removed, replaced, and/or loosened when servicing Authorized
Service Provider only parts. Make special note of each screw size and location during removal and replacement.
Bottom cover
Description
Bottom cover for use in natural silver models
Bottom cover for use in natural silver models on models equipped with GTX graphics
Bottom cover for use in pale gold models
Before removing the bottom cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1.
Remove the two rubber feet (1).
The rubber feet are available using spare part number L23887-001 for natural silver models and
L23888-001 for pale gold models.
32
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Components described in this chapter should only be accessed by an authorized service provider.
Only HP authorized service providers should perform the removal and replacement procedures
Labels on page 16
for details.
Spare part number
L23885-001
L41587-001
L23886-001
Table of Contents
