Table of Contents
en-us Troubleshooting
Issue
Noise level varies
17.1 Clean drain pump
Large food remnants or foreign
objects can block the drain pump.
As soon as the dishwashing water
no longer drains properly, the
drain pump must be cleaned.
CAUTION
There may be some sharp debris,
such as glass fragments, blocking
the drain pump.
Use caution when removing
parts for cleaning.
Disconnect the appliance from
1.
the power supply.
Remove the upper and lower
2.
rack.
Remove the filter system.
3.
Scoop out any water.
4.
Use a sponge if necessary.
54
Cause and troubleshooting
The noise level can vary, depending on what kind
of dishes are loaded and where they are placed.
Make sure the dishware is loaded in the most
secure way, resting on the tines and not hitting
each other.
→  "Loading dishware", Page 28
Spray arm is striking dishes.
Arrange dishware so the spray arms do not
strike dishware.
With a small load the water jets directly strike
against the tub.
Distribute the dishware evenly.
Load the appliance with more dishware.
Light items of dishware move about during the
wash cycle.
Position light items of dishware securely.
a Now you can reach the impeller
Pry the pump cover off using a
5.
spoon and grip it by the cross-
piece.
Lift the pump cover diagonally
6.
inward and take it out.
with your hand.
Remove any food remnants or
7.
foreign objects in the area of
the impeller.
Table of Contents
loading

Table of Contents