Table of Contents
White and black balance adjustment
Gray scale auto set up
BLAK, GAIN, FLARE and GAMMA parameter can be adjusted automatically using with the gray scale
chart.(Refer to function menu 4. MAINTENANCE)
Gray scale chart with gate marker in the View Finder.
Gray scale auto set up can be accessed from Function menu or the Remote control unit and following
message is displayed in the view finder during auto set up working
Cursor move to set up item.
Messages
Following messages are displayed in the view finder as an auto set up result.
Message
CHANGE TO CAM
NOT GRAYSCALE
SETUP OK!!!
BLACK: OK
BLACK: NG M.BLACK
GAIN(GAMMA/FLARE) NG R
GAIN(GAMMA/FLARE) NG G
GAIN(GAMMA/FLARE) NG B
GAIN(GAMMA/FLARE) NG R/G
GAIN(GAMMA/FLARE) NG R/B
GAIN(GAMMA/FLARE) NG G/B
GAIN(GAMMA/FLARE) NG R/G/B
BREAK OFF
Note
At high gain setting, iris position is set as follows after auto setup.
(1) When controlled via RU-1500JY: Iris value which is set before the auto setup
(2) When controlled via SU-1000:
Gate marker
Cause
Error: Change Bar to CAM
Not in the gate marker or no gray chart
Finish set up
Finish set up
Master black setup error
R CH error
G CH error
B CH error
R&G CH error
R&B CH error
G&B CH error
R&G&B CH error
Setup was aborted.
Iris value of rated video output level (100%)
26
Table of Contents
