Removing The Fittings - Bosch KDN56 Series Information For Use

Hide thumbs Also See for KDN56 Series:
Table of Contents
Available languages
  • EN

Available languages

  • ENGLISH, page 1
en Cleaning and servicing
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
→ Page 15
Putting the food into the appliance.
6.
13.3 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the shelf
Pull out, life and remove the shelf.
→ Fig.
10
Removing door rack
Lift the door rack and remove it.
→ Fig.
11
Removing the container divider
Lift up and remove the container
divider.
→ Fig.
12
Removing the storage container
Pull out the storage container as
1.
far as it will go.
Lift the storage container at the
2.
front
and remove it
→ Fig.
13
Removing the fruit and vegetable
container
Pull out the fruit and vegetable
1.
container as far as it will go.
Lift the fruit and vegetable con-
2.
tainer at the front
⁠ .
→ Fig.
14
24
⁠ .
and remove it
Removing the ice cube maker
Remove and empty the ice cube
1.
tray 
and the ice storage con-
tainer  ⁠ .
→ Fig.
15
Press the push-button
2.
the ice cube maker from the
holder and remove the ice cube
maker  .
→ Fig.
16
Lift the rear end of the holder and
3.
lower it behind the freezer com-
partment shelf  . Remove the
holder towards the front  ⁠ .
→ Fig.
17
to release
Table of Contents
loading

Table of Contents