Table of Contents
grammes. It will increase the run time
and consumption values, e.g. water
and electricity.
Overview of consumption values with regeneration the water softening
system
Here you can find an overview of the maximum additional running time and
consumption values during regeneration of the water softening system.
You can find the column applicable to your model in the quick reference guide
according to its water consumption in the Eco 50° programme.
Water consump-
tion in litres (de-
pending on
model)
6.5 / 6.7
7.5 / 7.7
9.5
above 10.5
The consumption values specified
are laboratory measurements determ-
ined in accordance with the currently
applicable standard and using the
Eco 50° programme and the factory
value of the water hardness is set to
16 - 20°E.
Rinse aid system
Rinse aid system
You can use the rinse aid system
and rinse aid to get tableware and
glasses rinsed perfectly without
marks.
Rinse aid
For optimum drying results, use rinse
aid.
Only use rinse aid for domestic dish-
washers.
Regeneration of
the water soften-
ing system after
x rinse cycles
8
7
6
5
Additional run-
ning time in
minutes
7
7
7
7
Adding rinse aid
If the rinse aid refill indicator lights
up, top up with rinse aid. Only use
rinse aid for domestic dishwashers.
Press the catch on the lid of the
1.
dispenser for rinse aid
Add rinse aid up to the max mark.
2.
Rinse aid system en
Additional water
consumption in
litres
5
5
5
5
2
1
Additional power
consumption in
kWh
0.05
0.05
0.05
0.05
and lift .
31
Table of Contents
