Changing The Basic Settings; Remote Start ", Page; Changing The Basic Settings", Page; Home Connect → Page - Bosch SHV9PCM3N Use And Care Manual
Hide thumbs
Also See for SHV9PCM3N:
- User manual ,
- Quick start and safety manual (13 pages) ,
- Use and care manual (44 pages)
Table of Contents
en-us Basic settings
Basic setting
Start cycle
Signal volume
Button volume
Wi-Fi
Remote Start
Factory setting
1
Factory setting (may vary according to model)
14.2 Changing the basic settings
Tip: Connect your appliance to a mobile device. You can
conveniently change all settings using the
Home Connect® app.
→ "Home Connect® quick start", Page 25
Open the appliance door.
1.
Press
.
2.
To open the basic settings, press the
3.
seconds.
→ "Controls", Page 8
Press the
button repeatedly until the display shows
4.
the required setting.
24
Display text
Selection
SP:00
1
SP:00 - SP:01
1
SL:02
SL:00 -SL:03
bL:02
1
bL:00 - bL:03
Cn:00
Cn:00 - Cn:01
rc:01
rc:00 - rc:02
rE:
Starting with
Y:ES
Confirming with
button for 3
Description
Set a default cycle for when the appliance is
switched on.
¡ With the setting "SP:00", the last cycle
selected and the last additional function
selected are set by default when the
appliance is switched on.
¡ With the setting "SP:01", the standard
cycle is set by default when the appliance
is switched on.
Adjusting the signal volume.
Level "SL:00" switches the signal tone off.
Set the button volume during operation.
Level "bL:00" switches the button tones off.
Switch the wireless network connection on
or off.
Level "Cn:00" switches the wireless network
connection off.
The basic setting is not available until you
have connected the appliance with the
Home Connect® app.
→ "Home Connect® ", Page 25
Activate or deactivate
→ "Remote Start ", Page 25 .
The following settings are possible:
¡ With the setting "rc:00", the option is
permanently deactivated.
¡ With the setting "rc:01", the option can be
selected via the
→ "Activating Remote Start ", Page 25
¡ With the setting "rc:02", the option is
permanently activated.
The basic setting is not available until you
have connected the appliance with the
Home Connect® app.
→ "Home Connect® ", Page 25
Restore changed settings to the factory
settings.
The settings for initial use must be
configured.
Press
repeatedly until the display shows the right
5.
value.
You can change one or more settings.
To store the settings, press the
6.
Close the appliance door.
7.
button.
button for 3 seconds.
- Quick Links:
- Controls
Hide quick links:
Table of Contents
