Equipment Description - Electrolux Groen TDB/6 Operators & Service Manual

Steam jacketed kettle
Table of Contents
KLENZADE SALES CENTER ECOLAB. Inc.
370 Wabasha
St. Paul, Minnesota 55102
800/352-5326 or 612/293-2233
NATIONAL FIRE PROTECTION ASSOCIATION
60 Battery March Park
Quincy, Massachusetts 02269
NFPA/70 - The National Electrical Code
NSF INTERNATIONAL
789 N. Dixboro Road
P.O. Box 130140
Ann Arbor, Michigan 48113-0140
UNDERWRITERS LABORATORIES, INC.
333 Pfingsten Road
Northbrook, Illinois 60062
ZEP MANUFACTURING CO.
1310-T Seaboard Industrial Blvd.
Atlanta, Georgia 30318
4
OM-TDB/6
References

Equipment Description

The TDB and TDBC are table top, tilting, steam jacketed kettles with a thermostatically
controlled, self-contained, electrically-heated steam supply and appropriate controls,
mounted on a sturdy base. (Image at left shown with optional TS/9 stand).
The body of the kettle is constructed of stainless steel, welded into one solid piece.
The kettle is furnished with a reinforced rim and a butterfly shaped pouring lip. It has
a steam jacket rated for a design pressure of 50 PSI (3.45 Bar/345 kPa). Kettle finish
is 180 emery grit on the inside and bright semi-deluxe on the outside. A tilt handle
allows the operator to manually tilt the kettle body in a controlled manner. Pouring
height accepts pans up to four inches high on a table top.
A built-in steam generator, sized for the kettle capacity and heated by electricity,
delivers steam into the jacket. "Airless" operation of the steam jacket permits uniform,
efficient heating at temperatures as low as 150°F (65.6°C) and as high as 295°F
(146°C). In addition to the adjustable thermostat for operating control, the unit has
a tilt cut-off switch, low water cut-off, pressure relief valve, and high-limit pressure
switch as safety features. A heating indicator light, pressure gauge, and sight glass
are provided for monitoring kettle operation.
A single electrical connection is required for installation. The unit employs single
phase 208 or 240 volt power.
KETTLE CHARACTERISTICS
Description
Kettle Capacity
Jacket Capacity
Inside Diameter
Depth
kW at 208 Volts Single Phase
3.6 KW, 17.3 Amperes
kW at 240 Volts Single Phase
4.8 KW, 20 Amperes
Base Width
Base Depth
Optional equipment available:
1. Lift-off cover
2. Basket insert
3. TS/9 Stand, which holds a pan for filling (see image at left)
4. Faucets
TDB/6
10 qt / 9.4 liter
1 quart / 0.9 liter
12 in / 30.5 cm
9 in / 23 cm
19 in / 48.3 cm
9.25 in / 23.5 cm
OM-TDB/6
5
Table of Contents
loading

Table of Contents