Page 2
• In no event will SONY be liable for any financial damage or loss of profits, including claims made by third parties, arising out of the use of the software supplied with this player.
Table of Contents Chapter 1 Viewing image files (PictureGear Pocket) What you can do with PictureGear Pocket ... 10 Installing ... 11 Installing the PictureGear 4.4Lite software on your computer ... 11 Viewing image files stored in your CLIÉ handheld ... 12 Transferring image files to your CLIÉ...
Page 4
Table of Contents Chapter 3 Playing a movie (gMovie player) What you can do with gMovie player ... 42 Installing ... 43 Install PictureGear 4.4Lite software on your computer ... 43 Playing movies with your CLIÉ handheld ... 44 Transferring movies to your CLIÉ handheld ...
Page 5
Chapter 6 Importing your favorite sounds (Sound Utility/Sound Converter) What you can do with Sound Converter/Sound Utility ... 74 Installing ... 75 Installing the Sound Utility application on your CLIÉ handheld ... 75 Installing the Sound Converter software on your computer ... 76 Storing sound data in your CLIÉ...
About this manual Welcome to the Sony Personal Entertainment Organizer (referred to as the “Sony CLIÉ Handheld” or “CLIÉ handheld” in this manual). Your Sony CLIÉ Handheld comes with three manuals: Read This First The Read This First manual gives you an overview of your CLIÉ...
Page 7
Add-on Applications Guide (this manual) The Add-on Applications Guide describes how to install and use the supplied add-on applications, including; I PictureGear ™ Pocket/PhotoStand/PictureGear 4.4Lite I CLIÉ Paint I gMovie ™ I World Alarm Clock I CLIÉ Remote Commander I Sound Utility/Sound Converter I MS Autorun I MS Import/Export The three manuals all describe operations of two models of the CLIÉ...
What you can do with PictureGear Pocket PictureGear Pocket is a picture album application for your CLIÉ handheld. Anytime anywhere... You can store still image files from various sources, including those taken with a digital camera or downloaded from the Internet to your CLIÉ...
Installing You do not have to install the PictureGear Pocket application on your CLIÉ handheld The PictureGear Pocket application is factory pre-installed. This section describes how to install the PictureGear 4.4Lite software. Installing the PictureGear 4.4Lite software on your computer You can convert the image files stored in your computer using the PictureGear 4.4Lite software.
Viewing image files stored in your CLIÉ handheld You can transfer image files taken by a digital still camera or downloaded from the Internet, etc. to your CLIÉ handheld. These items can be managed using the PictureGear 4.4Lite software on your computer.
Page 13
To save an image file to a Memory Stick media You can also transfer image files directly to a Memory Stick media. Install the MS Export software on your computer beforehand (page 93). Connect the cradle to a computer in which you have installed the MS Export software.
Viewing image files stored in your CLIÉ handheld Viewing image files with your CLIÉ handheld On the Application Launcher screen, rotate the Jog Dial navigator to select PG Pocket and then press the Jog Dial navigator. Or, tap the PG Pocket icon on the Application Launcher screen. PictureGear Pocket application starts.
Page 15
Rotate the Jog Dial navigator to display the desired image file, then press the Jog Dial navigator. Or, tap the desired image. The selected image appears. When you want to hide icons displayed at the bottom of your CLIÉ handheld screen, tap When you want to display them again, tap the screen, or press the Jog Dial navigator or the BACK button.
Page 16
Viewing image files stored in your CLIÉ handheld Viewing detailed information for the image file (detailed) while the image file is displayed. Detailed information for the image file appears. Magnifying image files while the image file is displayed. Rotate the Jog Dial navigator to magnify the image file. When you press the Jog Dial navigator, the image file is automatically magnified on the screen.
Page 17
Changing the image file list screen You can change the image file list screen to display items by name and date, or by thumbnail image. By name and date (List mode) To display the image file list by name and date (List mode) To display the image file list by thumbnail image (Preview mode) By thumbnail image (Preview mode)
Viewing image files stored in Memory Stick media Image files shot by a digital still camera or digital video camera recorder and recorded in a Memory Stick media are stored in the DCF (Design rule for Camera File system) format. This format differs from the PGP format which is the standard for the PictureGear Pocket application.
Page 19
Development Association). • Using the PictureGear Pocket application, you cannot view image files shot by a device that does not support the DCF format such as the Sony digital video camera recorder DCR-TRV9000 or Sony digital still camera DSC-D700/D770. • DCF format image files are stored in the DCIM directory of the Memory Stick media.
Copying image files Saving image files stored on your CLIÉ handheld to a Memory Stick media (Export) Display the image file that you want to save (page 14). (Import/Export). The Import/Export dialog box appears. • To change the category of the image files, tap the arrow V and select the desired category.
Tap the check boxes to select the image files you want to save. Tap Export. The Import/Export dialog box appears. Tap OK. Saving image files stored on a Memory Stick media to your CLIÉ handheld (Import) Display the image file that you want to save (page 14). (Import/Export).
Page 22
Copying image files Saving multiple image files to your CLIÉ handheld at once You can copy both DCF and PGP format image files from a Memory Stick media to your CLIÉ handheld with the following procedure. The DCF image files will be automatically converted into PGP format. In the photo list screen, tap The check boxes used for selecting the image files appear.
Displaying image files one after another (PhotoStand) You can display image files one after another when you place your CLIÉ handheld on the cradle (PhotoStand function). You can also use your CLIÉ handheld as a clock by displaying the current time using the PhotoStand application. Making a PhotoStand setting In the photo list screen of PictureGear Pocket, tap (PhotoStand).
Displaying image files one after another (PhotoStand) • Show the icon on Home Screen: If you do not want to show the icon of the file set for PhotoStand application on the Application Launcher screen, tap to deselect this check box. •...
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select the folder manually. At the default setup, Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the PGPocket Samples folder.
How to read the online manual Detailed information on the PictureGear Pocket application is provided in the online manual in the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
PictureGear Pocket menu items The following items appear when you tap the MENU icon. This section describes the menu commands specific to the PictureGear Pocket application. Photo list screen View menu List Changes the view of the photo list screen. PhotoStand Starts the PhotoStand application.
PictureGear Pocket menu items Options menu Preference (available only when you view image files stored in the Memory Stick media) Shows the Preference screen. Tap to select the default image format. About PictureGear Pocket Shows the version information of the PictureGear Pocket application. Image file screen View menu Back...
Page 29
Image menu Import/Export Imports/exports the currently selected image file. For details, see “Copying image files” on page 20. Delete Deletes the currently selected image file. For details, refer to the online manual. Beam Beams the currently selected image file to another CLIÉ handheld. CLIÉ...
What you can do with CLIÉ Paint CLIÉ Paint is a drawing tool application used to draw on PictureGear Pocket images. Drawing on image files stored on your CLIÉ handheld Using the CLIÉ Paint application, you can draw and paint on a PGP format image file stored on your CLIÉ...
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the CLIÉ Paint folder.
Starting CLIÉ Paint To work on a white background On the Application Launcher screen, rotate the Jog Dial navigator to select CLIÉ Paint and then press the Jog Dial navigator. Or, tap the CLIÉ Paint icon on the Application Launcher screen. Tap to select the screen size of your drawing (320✕320, 320✕240, 160✕160, or 160✕120).
Drawing with CLIÉ Paint Elements of the edit screen 1 Menu Button Displays the menu screen. • New Image: Displays a new white background to draw on. • Load Image: Imports a PGP formatted image stored on the CLIÉ handheld to the CLIÉ Paint application. •...
Page 36
Drawing with CLIÉ Paint 3 Color palette Shows the color or a grayscale shade for drawing letters or objects. PEG-T615C: Choose the color/shade from the palette. The bottom left tab of the palette shows the presently selected color/shade (including color/shade sampled with the color sampler tool). To edit the selected color/shade, tap the bottom left tab.
Painting with the tools On the edit screen, tap the box on the Tool switch bar until the tool of your choice is displayed. Tap a palette tab to select a color/shade. Tap to select the tool icon and draw on the image or the white background.
Page 38
Drawing with CLIÉ Paint Pattern stamp tool: Lets you stamp various patterns on the • image. After you tap to select the pattern, the selected pattern is displayed with a dotted border around it. While it is boxed, you can drag it with the stylus and change its location on the image. Tap anywhere outside the dotted border to place it.
Saving edited images Saving edited image files on your CLIÉ handheld When you finish the editing, tap The Menu dialog box appears. Tap Over-write or Save As. • Over-write: Over-writes the former image with the edited one. The former image will not remain on memory once overwritten. •...
How to read the online manual Detailed information on the CLIÉ Paint application is provided in the online manual in the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
What you can do with gMovie player gMovie is an application which allows you to display or play back ® movie file created with Windows applications such as PictureGear 4.4Lite, on your CLIÉ handheld. Playing movies on your CLIÉ handheld You can play a movie that has been converted to the proper format and then transferred from your computer, or stored in the Memory Stick media.
Installing You do not have to install gMovie player on your CLIÉ handheld The gMovie player is factory pre-installed. Install PictureGear 4.4Lite software on your computer Install PictureGear 4.4Lite software on your computer according to the instructions on page 11.
Playing movies with your CLIÉ handheld You can transfer to your CLIÉ handheld movies that are shot by a digital still camera or downloaded from the Internet, etc., and that are managed by the PictureGear 4.4Lite software on your computer. You will need to optimize the movies on your CLIÉ...
Page 45
To save a movie to the Memory Stick media You can also transfer movie files directly to a Memory Stick media. Install the MS Export software on your computer beforehand (page 93). Connect the cradle to a computer in which you have installed the MS Export software.
Playing movies with your CLIÉ handheld Playing movies On the Application Launcher screen, rotate the Jog Dial navigator to select gMovie and then press the Jog Dial navigator. Or, tap the gMovie icon on the Application Launcher screen. The gMovie player starts and the movie list screen appears. Tap the movie you want to play.
Page 47
To return to the movie list screen (Return) at the upper-right corner of the screen. To play the next movie (Next) at the upper-right corner of the screen. To play movies one after another (continuous playback) Tap and hold (Next) at the upper-right corner of the screen for a few seconds.
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select the folder manually. At the default setup, Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the gMovie Samples folder.
How to read the online manual Detailed information on gMovie player is provided in the online manual on the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
gMovie menu items The following items appear when you tap the MENU icon on your CLIÉ handheld screen. This section describes the menu commands specific to gMovie player. Media list screen Media menu About gMovie Shows version information of the gMovie application. Movie file screen Media menu Details...
Chapter 4 Viewing the World Alarm Clock (World Alarm Clock) This chapter describes how to use your CLIÉ handheld as an alarm clock showing the world time and date.
What you can do with World Alarm Clock The World Alarm Clock is an application that you can install on your CLIÉ handheld and that provides you with an additional clock, which can give you the local time, the time around the world, and also work as an alarm clock.
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the WAC folder.
Using the World Alarm Clock Viewing world time On the Application Launcher screen, rotate the Jog Dial navigator to select WA Clock and then press the Jog Dial navigator. Or, tap the WA Clock icon on the Application Launcher screen. The World Alarm Clock application starts and the clock screen is displayed.
Selecting other time zones to be displayed You can select up to three areas to be displayed other than your present location. The time and date for these other areas will be displayed on the lower half of the clock screen. On the clock screen, tap the area name (the default setting is “USA (Pacific)”) for the smaller clock on the lower half of the screen.
Page 56
Using the World Alarm Clock Tap the arrow V next to Off, and select On. On the Comment line, enter a note that you would like to attach to the alarm. Tap the Time box. The Set Time screen appears. Set the time.
Page 57
3 If you selected Sound in 1: Select the way you want the alarm to sound. • Crescendo: Tap the check box to select this if you want the alarm to increase its volume while it sounds. • Duration: Tap the arrow V next to this item to select the length of time the alarm will go on when left alone.
Using the World Alarm Clock Cancelling a set alarm You can deactivate an alarm without deleting its setting. On the clock screen, tap the Set Alarm alarm you wish to cancel. The Set Alarm screen for that alarm appears. Tap the arrow V next to On, and select Off from the drop-down list.
How to read the online manual Detailed information on the World Alarm Clock application is provided in the online manual of the software on the supplied CD- ROM. To view the World Alarm Clock online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
World Alarm Clock menu items The following item appears when you tap the MENU icon. This section describes the menu command specific to World Alarm Clock application. Options menu Day Color Set a different color for each day of the week. The color is displayed in monochrome for monochrome models.
Chapter 5 Using your CLIÉ handheld as a remote commander (CLIÉ Remote Commander) This chapter describes how to use your CLIÉ handheld as a remote commander to control various devices.
What you can do with CLIÉ Remote Commander The CLIÉ Remote Commander is an application you can install on your CLIÉ handheld to enable the CLIÉ handheld to function as a remote commander. A single remote control for multiple devices You can control a variety of remote-controlled devices (e.g.
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the RMC folder.
Preparing the CLIÉ Remote Commander for your use Assigning devices to the CLIÉ Remote Commander Note To check whether the manufacturer of your remote-controlled device is supported by the CLIÉ Remote Commander application, refer to the “Appendix” on page 102. On the Application Launcher screen, rotate the ™...
Page 65
Tap the arrow V next to the following items and select the appropriate settings for your device(s). • Category: Select the device you want to remote-control. Select from TV, VCR, DVD, AV-AMP (amplifier). • Maker: Select the manufacturing company of the remote- controlled device from the drop-down list.
Page 66
Preparing the CLIÉ remote commander for your use Changing the remote control setting Tap Menu which you want to change the remote control settings. Tap Detail from the Options menu. The Detail screen appears. Make changes as necessary and tap OK. The CLIÉ...
Assigning operations to the application buttons and Jog Dial navigator You can assign operations to the Jog Dial application buttons on the front panel. This is convenient for those operations you perform most (e.g. adjusting the TV volume), since you do not even have to take out the stylus to operate.
Page 68
Preparing the CLIÉ remote commander for your use Tap the box next to each assignable button (e.g. JOG Up). The Key Assignment dialog box for each button appears. Tap the arrow V next to Entry, and select the name of the remote control setting you wish to assign to the key.
Using the CLIÉ handheld as a remote commander You can operate a remote-controlled device on the device’s control screen. For those operations you have assigned to the Jog Dial navigator or to the application buttons, see page 67. Notes • Be sure to point the IR port of your CLIÉ handheld toward the device that you wish to remote-control.
Using the CLIÉ handheld as a remote commander Operating devices directly with the Jog Dial navigator or the application button Follow the steps below to perform the assigned operation from the Jog Dial navigator or the application buttons. Start CLIÉ Remote Commander. Use the Jog Dial navigator or the application buttons to remote-control the device.
How to read the online manual Detailed information on the CLIÉ Remote Commander application is provided in the online manual of the application on the supplied CD- ROM. To view the CLIÉ Remote Commander online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer.
CLIÉ Remote Commander menu items The following items appear when you tap the MENU icon. This section describes the menu commands specific to the CLIÉ Remote Commander application. For the Edit menu, see “Using the edit menu” in the Operating Instructions manual. Options menu Detail Shows the remote control setting for the displayed control screen.
Chapter 6 Importing your favorite sounds (Sound Utility/Sound Converter) This chapter describes how to import sound data from your computer to your CLIÉ handheld.
What you can do with Sound Converter/ Sound Utility The Sound Converter software converts “WAVE format” or “Standard MIDI File Format 0” sound data on your computer to sound data compatible with the format used by your CLIÉ handheld. The Sound Utility application then enables you to play those converted data on your CLIÉ...
Make sure that the Add-on folder is selected. If the Add-on folder is not selected, select it manually. At the default setup, the Add-on folder is stored in the Sony Handheld folder of the Program Files folder. Double-click the Sound Utility folder.
Installing Installing the Sound Converter software on your computer Install the Sound Converter software on your computer using the supplied Installation CD-ROM. Insert the Installation CD-ROM to your computer’s CD-ROM drive. The installation launcher window appears. Select the model of your CLIÉ handheld (PEG-T615C or PEG-T415).
Storing sound data in your CLIÉ handheld Using the Sound Converter software, you can convert “WAVE format” and “Standard MIDI File Format 0” sound data on your computer. Converted data can be transferred to your CLIÉ handheld via a HotSync operation. Transferring sound data to your CLIÉ...
Storing sound data in your CLIÉ handheld Setting an imported sound data as an alarm sound You can set your favorite sound as an alarm sound with the Date Book and the World Alarm Clock applications. Imported sound data are automatically registered in the alarm sounds list in addition to the default sounds.
Managing sound data You can manage the imported sound data using the Sound Utility application on your CLIÉ handheld. Playing sound data on your CLIÉ handheld You can play transferred sound data using the Sound Utility application. On the Application Launcher screen, rotate the Jog Dial navigator to select Sound Utl and then press the Jog Dial navigator.
Managing sound data To stop playback If the sound data are hard to hear Lower the sound level of the original sound data, then transfer the data to your CLIÉ handheld again. Delete the sound data (see the following section for details). Perform steps 1 to 2 on page 77.
Changing the name of a sound data From the Sound Utility window, tap the desired sound data in the data list, then tap Rename. The Rename Sound Data dialog box appears. Type the desired name and tap OK. The selected data name is changed, and the data list is updated. Sorting the sound data list You can sort the data list by name, size, playback time, or data type.
Sound Utility menu items The following item appears when you tap the MENU icon. This section describes the menu command specific to the Sound Utility application. Options menu About Sound Utility Shows the version information of Sound Utility application.
Chapter 7 Setting the Memory Stick automatic start function (MS Autorun) This chapter describes how to set the Memory Stick automatic start function on your CLIÉ handheld. If you want to start an application in the Memory Stick media from the Application Launcher screen, refer to the Operating Instructions manual.
What you can do with MS Autorun Memory Stick Autorun (hereafter referred to as MS Autorun) is an application which allows your CLIÉ handheld to copy and start a specified application automatically when Memory Stick media is inserted into the CLIÉ handheld. Removing the Memory Stick media automatically deletes the application copy from the memory of the CLIÉ...
Page 85
Notes • It is not recommended that you use MS Autorun application with the Address Book, Date Book, To Do List, Memo Pad, Calculator or Mail applications. Problems may occur if the data of these applications do not reside on your CLIÉ...
Setting Auto-run for an application To automatically start an application stored in a Memory Stick media, perform the following procedure. Note This procedure is an example to set the PictureGear Pocket application to start automatically. In this case, a Memory Stick media containing photos must be inserted to the CLIÉ...
Page 87
To use the auto-run function with this example If the Application Launcher screen is displayed and you insert Memory Stick media into your CLIÉ handheld, the PictureGear Pocket application starts automatically. In this case, if you remove the Memory Stick media, the PictureGear Pocket quits automatically and the Application Launcher screen appears.
How to read the online manual Detailed information on the MS Autorun application is provided in the online manual on the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
MS Autorun menu items The following items appear when you tap the MENU icon. This section describes the menu commands specific to the MS Autorun application. Options menu Display log When Memory Stick media is inserted into or removed from your CLIÉ...
Chapter 8 Copying the data to the Memory Stick media on your CLIÉ handheld (MS Import/Export) This chapter describes how to copy the data on your computer to the Memory Stick media on your CLIÉ handheld directly without performing HotSync operation.
What you can do with MS Import/Export Both Memory Stick (MS) Import and Memory Stick (MS) Export are applications designed to help you copy the data on your computer to the Memory Stick media on your CLIÉ handheld directly without performing a HotSync operation.
Installing You need to install the MS Export software on your computer. (The MS Import application is already installed on your CLIÉ handheld). Insert the installation CD-ROM into the CD-ROM drive of your computer. The setup program starts automatically. Select the model of your CLIÉ handheld (PEG-T615C or PEG-T415).
Installing CLIÉ applications using MS Import/Export You can install applications for your CLIÉ handheld into the Memory Stick media without performing HotSync operation, if you use MS Import/Export applications. Connect the cradle to a computer in which you have installed the MS Export software. Insert the Memory Stick media into your CLIÉ...
Page 95
Confirming the contents of the Memory Stick media after copying the application Restart MS Export software, then click the Memory Stick Drive tab of the MS Export software. Note You cannot copy applications by dragging them to the Memory Stick Drive window of the MS Export software.
Using your CLIÉ handheld as a removable disk Connect the cradle to a computer in which you have installed the MS Export software. Insert the Memory Stick media in your CLIÉ handheld. Place your CLIÉ handheld on the cradle. On the Application Launcher screen, rotate the Jog Dial navigator to select MS Import and then press the Jog Dial navigator.
How to read the online manual Detailed information on the MS Import/MS Export software is provided in the online manual on the supplied CD-ROM. To view the online manual, the Adobe Acrobat Reader version 4.0 or higher must be installed on your computer. Insert the supplied CD-ROM in your computer’s CD-ROM drive.
MS Import menu items The following item appears when you tap the MENU icon. This section describes the menu command specific to the MS Import application. Options menu About MS Import Shows the version information of the MS Import application.
Index CLIÉ Paint Elements of the edit screen ... 35 Painting with the tools ... 37 Saving edited image files on your CLIÉ handheld ... 39 To work on a PictureGear Pocket image ... 34 To work on a white background ... 34 What you can do with CLIÉ...
Page 101
Using your CLIÉ handheld as a removable disk ... 96 What you can do with MS Import/ Export ... 92 Menu items ... 98 Online manual CLIÉ Paint ... 40 CLIÉ Remote Commander ... 71 gMovie ... 49 MS Autorun ... 88 MS Import/Export ...