Table of Contents
Digital Congress Network | Installation and Operating Manual | Chapter 2 - Contribution Equipment
Applicable to solution No.8
.
1. Jumper J01 on the Multi-purpose connection unit is used to assign the unit for a chairman
position.
2. If the chairman needs to view the number of delegates currently speaking or requesting to speak,
then the LBB 3542/00 or LBB 3542/20 Voting control panel with alphanumeric LC-display can be
used.
3. The ID-chip card reader LBB 3543/15 is used to provide a chairman registration and/or access
function.
NOTE:
Using the LBB 3540/15 in combination with the range of flush-mounted units, any
number of configurations can be achieved to suit any conference requirement. The exam-
ples given, cater for both delegate and chairman positions with all the functions of a confer-
ence unit.
Flush mounted solution No.9 (Rostrum with two microphones)
LBB 3540/15
Multi-purpose connection unit
2 x LBB 3537/00 Microphone control panel with microphone stem (310mm/12.2 in)
2 x LBB 3537/50 Microphone control panel with microphone stem (480mm/18.8 in)
2 x LBB 3537/20 Microphone control panel for pluggable microphones types:
- LBB 3549/00 Microphone with stem length (310mm/12.2 in)
- LBB 3549/50 Microphone with stem length (480mm/18.8 in)
LBB 3538/00
Loudspeaker panel
General
A hand-held microphone LBB 3536/00 with 5 m cable or LBB 3536/10 with coiled cable
can be used instead of a flush mounted Microphone Control Panel with microphone (fixed
or pluggable).
Bosch Security Systems | 04-2003 | 3922 988 43318 en
FIG. 2-30
or
or
or
FIG. 2-30 Rostrum with two microphones
Get other manuals https://www.bkmanuals.com
en | 2-19
LBB 3540/15 Multi-purpose connection unit
2
Hide quick links:
Table of Contents
