Table of Contents
en
Getting to know your appliance
Selecting language
The language in the display window )2
can be set from p:
p:
(Deutsch) is the factory setting.
Language
Deutsch
English
Français
Nederlands
Italiano
Español
Português
Svenska
Norsk
Suomi
Dansk
Türkçe
Polski
esky
Magyar
Hrvatski
Slovensko
Slovenský
Român
q / Deutsch *
* depending on model
10
, to p:
. German
Setting
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
p:
To change the language:
1. Open the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button )" until
the digital display 8 : ... is
indicated.
4. Release both buttons.
5. Press programme button # until
the factory set value p:
indicated on the digital display 8.
"German" (Deutsch) is indicated in
the display window )2.
6. Press programme button 3.
Each time the button is pressed, the
set value increases by one level;
when the value of p:
reached, the display jumps back
to p:
7. Press START button )".
The set value is saved.
8. Close the door.
Display window
The display window )2 shows
the selected programme, the remaining
running time, the programme sequence
(in words and as a coloured progress
bar) and the selected options. In
addition, when there is low salt and/or
low rinse aid, the number of rinse cycles
still possible is indicated and the fault is
stated in the event of faults.
When the onboard computer
is switched on (see corresponding
chapter), further information is shown
and the water and energy consumption
is briefly displayed.
is
has been
Table of Contents
