Wireless Card; Removing The Wireless Card - Dell Latitude 3330 Service Manual

Hide thumbs Also See for Latitude 3330:

Table of Contents

Steps

1. Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 card connector on the system board.

2. Slide the M.2 2280 solid-state drive into the M.2 card connector on the system board.

NOTE:

A thermal pad sticker is adhered to the system board underneath the M.2280 solid-state drive. If in the process

of replacing the M.2280 solid-state drive, the thermal pad is separated from the plate or gets adhered to the M.2

2280 solid-state drive, technicians must readhere the thermal pad to the system board before reinstalling the M.2 2280

solid-state drive to the system.

3. Align the screw hole on the M.2 2280 solid-state drive with the screw hole on the palm-rest and keyboard assembly.

4. Replace the screw (M2x2) to secure the M.2 2280 solid-state drive thermal plate to the system board.

5. Close the M.2 2280 solid-state drive mylar sheet to cover the M.2 2280 solid-state drive.

NOTE:

There is a protective mylar sheet covering the M.2 2280 solid-state drive. This mylar sheet must be closed after

the installation procedure.

Next steps

1. Install the

base

cover.

2. Follow the procedure in

Wireless card

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

About this task

The following images indicate the location of the wireless card and provide a visual representation of the removal procedure.

After working inside your

Before working inside your

computer.

Removing and installing components