Table of Contents
72
en | Using your MIC Camera
12.3
Uploading a User Logo
Customers have the option to upload custom logos that display on the web browser of the
device.
All user logo images must comply with the following requirements:
–
–
–
Upload the Logo File
1.
2.
3.
4.
5.
6.
7.
Set Logo Transparency (Optional)
1.
2.
3.
Change the Camera Title
1.
2.
3.
4.
2017.11 | 0.20 | F.01U.349.011
The file format must be a bitmap (.bmp).
Height and width must not exceed 128 pixels.
Color depth must be 8 bit (256 color bitmap).
If necessary, open the browser. Click Configuration.
Click General. Select Display Stamping.
Select the field Camera name stamping. Select the position of the logo: Bottom, Top, or
Custom.
Note: If you select Custom, then additional fields (Position (XY)) appear where you can
specify the exact position of the logo. In the fields Position (XY), enter the values for the
desired position (0 - 255).
Click Logo Browse to open a file-search dialog. Select the image file (.bmp).
Click Upload to transfer the file to the camera.
The message "Upload successful" should appear.
The new logo, if applicable, replaces the previous one.
Select the field Logo position. Select the position of the logo on either side of the camera
name: Left, Right, or Logo only. (The default value is Off.)
Click Set to save.
Click the check box Transparent background.
Click Set to save.
Note that the color of the entire first line of the logo is the color that will be changed to
transparent in the remainder of the logo. For example, if the first line is white, then all of
the identical white colors of the logo image will become transparent.
Click General. Select Identification.
Delete all of the text in the field Camera name.
Rename the camera if desired.
Click Set to save.
User Manual
MIC IP fusion 9000i
Bosch Security Systems
Table of Contents
