Configure The Display Backlight - Emerson Micro Motion 4200 Installation Manual

2-wire transmitter

Hide thumbs Also See for Micro Motion 4200:

Table of Contents

Using the display controls

April 2023

6.1

Configure the display backlight

By default, the backlight is set to OFF. The backlight requires an additional 1V in voltage

over no backlight.

Procedure

To configure the backlight, select Menu → Configuration → Display Settings → Backlight.

Important

When using the arrow keys, you must first activate the capacitive button, then

release the same button by removing your finger from the glass to move up, down,

right, left or to make a selection. To enable auto-scroll when navigating up or down,

activate the appropriate button and continue to hold for one second. Release the

button when the desired selection is highlighted.

Figure 6-2: Example 2: Active arrow indicators on the transmitter display

Installation Manual

MMI-20058013

Micro Motion 4200 2-Wire Transmitter