Table of Contents
Display
Setting
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit,
played and you cannot select a higher power
level.
Time for selecting the cooking zone
Cookware test
You can use this function to test the quality
of the cookware.
Set circulating-air mode or air extraction
mode.
Setting automatic start
Setting the run-on
If your hob is working in air extraction mode,
the ventilation system is switched on at the
power level for approx. 6 minutes.
If your hob is working in circulating-air mode,
the ventilation system is switched on at the
power level for approx. 30 minutes.
The run-on function automatically switches
off after this time.
Restoring factory settings
1
Factory setting
14.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, touch and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
to view the individual displays.
15 Cookware test
The quality of the cookware has a major influence on
the speed and the result of the cooking process.
You can use this function to test the quality of the cook-
ware.
is dis-
.
for
Display
.
.
Value
- Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A.
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
- Unlimited: You can adjust the last selected cooking
zone without having to select it again.
– Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
- Not suitable.
- Not optimal.
- Suitable.
- Configure circulating-air mode.
- Configure air extraction mode.
- Switched off.
1
– Switched on.
- Switched off.
1
- Switched on
:
1
- Individual settings
.
- Factory settings.
Touch
to access the basic settings.
3.
a
and
light up alternately as well as as a preset
value.
Touch
repeatedly until the required function is
4.
displayed.
Use
or
to select the required value.
5.
Touch and hold
6.
a The settings are saved.
14.3 Exiting the basic settings
Touch
to switch off the hob.
▶
Before the test, ensure that the size of the cookware
base corresponds to the size of the cooking zone be-
ing used.
Access is via the basic settings. → Page 12
Cookware test en
1
.
1
1
for four seconds.
13
Table of Contents
