Table of Contents
Cleaning
en
D
Cleaning
C leaning the dryer and the
C l e a n i n g
control panel
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Disconnect the dryer from the mains
before cleaning.
Clean the dryer using only water and a
soft, damp cloth.
Remove all detergent residue, spray
residue or other residues immediately.
Do not use cleaning agents or agents
for pre-treating laundry (e.g. prewash
sprays, stain removers). Do not use
high-pressure cleaners or steam jet
cleaners to clean your appliance.
Cleaning the moisture sensor
The dryer is equipped with a
Note:
stainless-steel moisture sensor. The
moisture sensor measures how damp
the laundry is.
After long periods of use, a fine layer of
limescale can form on the moisture
sensors. This must be removed
regularly.
Open the door and clean the moisture
sensor with a rough sponge.
Caution!
The moisture sensor may be damaged.
Do not clean the moisture sensor with
steel wool and abrasive materials.
22
Cleaning the filter in the
condensation container
The filter in the condensation
Note:
container cleans the condensation
water that is used during the dryer's
automatic cleaning cycle.
Pull out the condensation container
1.
horizontally.
Pour out the condensation water.
2.
Remove the filter.
3.
Clean the filter under warm, running
4.
water or in the dishwasher.
Push in the filter until you feel it lock
5.
into place.
Caution!
The dryer may be contaminated
with fluff and thus become
damaged.
Only operate the dryer with the filter
inserted.
Push in the condensation container
6.
until you feel it lock into place.
Table of Contents
