Table of Contents
SPECIFICATIONS
20M35P
Display
Screen Type
Pixel Pitch
Sync Input
Horizontal Frequency
Vertical Frequency
Input Form
Video Input
Signal Input
Input Form
Resolution
Max
Recommend
Plug & Play
DDC 2B
Power
On Mode : 16 W (ENERGY STAR® standard)*
Consumption
Sleep Mode ≤ 0.3 W
Off Mode ≤ 0.3 W
Power Input
AC 100-240V ~ 50/60Hz 1.0 A
Dimensions
With Stand
(Width x Height x
Without Stand
Depth)
Weight
3.6 kg
Tilt Range
-5° to 20°
Environmental
Operating Temperature
conditions
Operating Humidity
Storage Temperature
Storage Humidity
Stand Base
Attached ( ), Detached (O)
Power cord
Wall-outlet type
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
* The power consumption level can be different by operating condition and monitor setting.
* The On mode power consumption is measured with ENERGY STAR® test standard.
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.
49.4 cm (19.5 inch) Flat Panel Active matrix-TFT LCDAnti-
Glare coating
Visible diagonal size: 49.4 cm
0.2712 mm x 0.2626 mm (Pixel Pitch)
30 kHz to 83 kHz (Automatic)
56Hz to 75Hz (D-SUB)
Separate Sync.
15 pin D-SUB Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
D-SUB(Analog) : 1600 x 900 @ 60 Hz
VESA 1600 x 900 @ 60 Hz
46.3 cm x 32.2 cm x 22.4 cm
46.3 cm x 28.3 cm x 6.0 cm
10°C to 35 °C
10 % to 80 %
-20°C to 60 °C
5 % to 90 % non-Condensing
23
SPECIFICATIONS
Table of Contents
