English Table of Contents Preparation ............9 Preparation 1: Setup ......... 9 Viewing Environment ......... 9 Preparation 2: Connection .......10 1. Preparing a PC ........10 2. Connecting the Display to a PC .....10 3. Connecting the AC Adapter....11 Preparation 3: Installing the Software on a PC ..............
Page 3
Before operating the display, please read this manual thoroughly and retain it for future reference. Note Images and illustrations used in the Setup Guide and this manual are for reference only and may differ from the actual product. Location of the identification label Labels for the Display Model No.
Page 4
Use only AC power cord (mains lead) supplied by Sony, not other suppliers. Insert the plug fully into the AC power outlet Installed on the mount arm (mains socket).
Page 5
Never insert USB plug when the product or Environments: Places that are hot, humid, or excessively charging cable is wet condition dusty; where insects may enter; where it might When the USB plug is inserted in a wet be exposed to mechanical vibration, near the condition, a short circuit occurs due to the source of naked flame, such as lighted candle,...
Page 6
(mains lead) immediately if any of the serious harm, such as choking hazard or following problems occur. intestinal injuries. If magnets (or a magnet) were Ask your dealer or Sony service centre to have it swallowed, consult a doctor immediately. checked by qualified service personnel. When: Precautions AC power cord (mains lead) is damaged.
Page 7
Screen: This equipment has been tested and found to comply with the limits set out in the EMC Although the screen is made with high- Standards using a connection signal cable precision technology and 99.99 % or more of shorter than 3 meters.
Page 8
Install the display so that the display’s stand For product protection and safety reasons, does not protrude out from table. If the stand Sony strongly recommends that installation of protrudes out from table, it may cause display your display on the Mount Arm be performed set to topple over, fall down, and cause by qualified professionals.
Room illuminance: Approx. 100 to 1,000 lx and developers. 100 lx and over for the surface of the face https://www.sony.net/dev-srd Viewing distance: 50 cm to 70 cm View the display avoiding direct outside light ...
To use the display, connect the display to a PC. For recommended PC specifications, visit the following site. USB-C https://www.sony.net/dev-srd 2. Connecting the Display to a PC USB-C Connect the display to a PC using one of the HDMI cable (supplied) following connection methods , , or .
Type-C - USB Type-C cable supporting DP Alt mode and USB 2.0. 1. Installing the SDK (Software Development Kit) Display For details on how to install, visit the following site. https://www.sony.net/dev-srd USB-C 2. Updating the Firmware USB-C USB Type-C - USB Type-C cable (sold separately) USB-C USB-C 3.
For details on how to create contents, visit the Connect the AC power cord (mains lead) to following site. the AC power outlet (mains socket). https://www.sony.net/dev-srd Press the (Power) switch to turn on the display. Note The indicator lights in white when the display is turned on.
Menu Items Changing the Settings of the Display Menu Setting Input Select Selects the video input source. HDMI Picture quality adjustment and settings can be USB-C made on the menu screen of the display. Brightness Adjusts brightness. Contrast Adjusts contrast.
(Power) switch. If the indicator is still flashing, check how many https://www.sony.net/dev-srd times the indicator flashes and consult qualified Sony service personnel. Image is not displayed correctly Check if your environment is suitable for viewing the display (page 9).
–20 °C to +60 °C Humidity 20% to 80% Product registration number (COMMISSION Power consumption DELEGATED REGULATION (EU) 2019/2013) 64 W ELF-SR2 (1435280) *5*6 Standby power consumption 0.5 W Maximum external dimensions (excluding the projecting parts) (w/h/d) 622 mm × 302 mm × 301 mm 631 mm ×...
Page 16
Licensing Information The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. DisplayPort™, the DisplayPort™ logo and the DisplayHDR™ logo are trademarks owned by the Video Electronics Standards Association (VESA®) in the United States and other countries.
(power) switch and indicator Location and Function of Press to turn on the power and start up the display. Parts and Controls The indicator lights up in white while the display is in operation. Press again to turn off the power, and the indicator goes off.
On accessing software to Open software licenses which the GPL/LGPL applies On the basis of license contracts between Sony and the software copyright holders, this product This product uses software to which the GPL/ uses open software. LGPL applies. This informs you that you have a...
SONY AND EACH OF THE THIRD-PARTY SUPPLIERS (for EXCLUDED SOFTWARE AND OPEN SOURCE (collectively, the “SOFTWARE”). purposes of this Section, SONY and each of the THIRD- COMPONENTS PARTY SUPPLIERS shall be collectively referred to as Notwithstanding the foregoing limited license grant, you Notwithstanding the foregoing, any software in the “SONY”) EXPRESSLY DISCLAIM ALL WARRANTIES, DUTIES...
Page 20
SOFTWARE for purposes of this EULA. By acceptance of this EULA, you consent to such update/modification. FORCE MAJEURE SONY shall not be liable for any delay or failure to perform resulting from causes outside its reasonable control, including, but not limited to, fire, floods, storms,...