Dell D15U001 Service Manual page 40

Steps

1. Align the pin-1 corner of the processor with the pin 1 corner of the processor socket, and then place the processor in the

processor socket.

NOTE:

The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor

socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of

the processor are higher than the others, the processor is not seated properly.

2. When the processor is fully seated in the socket, close the processor cover.

3. Press down and push the release lever under the securing tab to lock it.

Next steps

1. Install the

heat

sink.

2. Install the

fan

assembly.

3. Install the speaker.

4. Install the

side

cover.

5. Follow the procedure in

40

Removing and installing components

after working inside your

computer.