1. Manuals
  2. Brands
  3. Asus Manuals
  4. LED TV
  5. SA555-Y
  6. User manual

Asus SA555-Y User Manual

Hide thumbs Also See for SA555-Y:
Table of Contents

Quick Links

SA495-Y/
SA555-Y
User Manual (English)
Table of Contents
loading

Related Manuals for Asus SA555-Y

Summary of Contents for Asus SA555-Y

  • Page 1 SA495-Y/ SA555-Y User Manual (English)
  • Page 2 SA495-Y/SA555-Y Safety Instructions Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your display: Operation: • Keep the display out of direct sunlight and away from stoves or any other heat sources.
  • Page 3 SA495-Y/SA555-Y Read and follow these instructions when connecting and using your display: • Unplug the display if you are not going to use it for an extensive period of time. • Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. • Consult a service technician if the display does not operate normally when you have followed the instructions in this manual. • The casing cover should be opened only by qualified service personnel. • Keep the display out of direct sunlight and away from stoves or any other heat sources. • Remove any object that could fall into the vents or prevent proper cooling of the display’s electronics. • Do not block the ventilation holes on the cabinet. • Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
  • Page 4 SA495-Y/SA555-Y Europe – EU Declaration of Conformity This device complies with the essential requirements of the Radio Equipment Directive (2014/53/EU). The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the Radio Equipment Directive (2014/53/EU). Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.
  • Page 5 SA495-Y/SA555-Y Russia: Подтверждение соответствия Минкомсвязи России: Декларация соответствия № Д-РД-4225 от 04.07.2016 года, действительна до 03.07.2022 года, зарегистрирована в Федеральном агентстве связи 11.07.2016 года. Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark “B” confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/ E-06251.
  • Page 6 SA495-Y/SA555-Y Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. Important: This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows:+ 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
  • Page 7 SA495-Y/SA555-Y Turkey RoHS: Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur. Ukraine RoHS: Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057. End-of-Life Disposal Your new Public Information Display contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old display from your local ASUS dealer. (For customers in Canada and U.S.A.) This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal regulations. For additional information on recycling contact www.eia.org (Consumer Education Initiative) Waste Electrical and Electronic Equipment-WEEE Attention users in European Union private households This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste.
  • Page 8 警告使用者 : 此為甲類資訊技術設備 , 於居住環境中使用時 , 可能會造成射頻擾動 , 在此種情況下 , 使用者會被要 求採取某些適當的對策 . 电子电气产品有害物质限制使用标识要求 (中国RoHS法规标识要求) 产品中有害物质的名称及含量。 設備名稱： 液晶彩色顯示器， 型號 （型式） ： SA495-Y/SA555-Y 有害物質 單元 鉛 汞 鎘 六價鉻 多溴聯苯...
  • Page 9 SA495-Y/SA555-Y 1. 警語 : 使用過度恐傷害視力。 2. 注意事項 : (1) 使用 30 分鐘請休息 10 分鐘。 (2) 未滿 2 歲幼兒不看螢幕，2 歲以上每天看螢幕不要超過 1 小時。 Taiwan: 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電信法規定作業之無線電通信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。...

  • Page 10: Table Of Contents

    SA495-Y/SA555-Y Table Of Contents 5.2. Wi-Fi ....................19 5.3. Ethernet..................19 5.3.1. DHCP ................19 Unpacking and Installation ............1 5.3.2. Static IP ................20 1.1. Unpacking ..................1 5.4. Signage Display ................20 1.2. Package Contents ................1 5.4.1. General Settings .............20 1.3. Installation Notes .................1 5.4.2. Server Settings ............23 1.4.
  • Page 11 SA495-Y/SA555-Y 10. Cleaning and Troubleshooting ..........49 10.1. Cleaning ..................49 10.2. Troubleshooting .................50 11. Technical Specifications ............51...

  • Page 12: Unpacking And Installation

    SA495-Y/SA555-Y Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2. Package Contents Please verify that you received the following items with your package content: • LCD display • Quick Start Guide NORMAL • Remote control with AAA batteries SOURCE FORMAT LIST INFO • Power cord (1.8 m) ADJUST OPTIONS • HDMI cable (1.8 m) ID SET...

  • Page 13: Installing And Removing Table Stands (Optional)

    SA495-Y/SA555-Y 1.4. Installing and Removing Table Stands (optional) Step 1- Put on the table Lay a protective sheet on the table, whick was wrapped arround the display when it was packaged, beneach the screen surface so as not to scratch the screen face. Step 2- Fix the tube to the display (by using M6xL41 screws) Please refer to the following drawing to know the position of screws. Step 3- Set up the stand (by using thumb)

  • Page 14: Mounting On A Wall

    SA495-Y/SA555-Y 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard. Protective Sheet VESA Grid Table 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2. Ensure you have all accessories for mounting this display (wall mount, ceiling mount, table stand, etc). 3. Follow the instructions that come with the base mounting kit. Failure to follow correct mounting procedures could result in damage to the equipment or injury to the user or installer. Product warranty does not cover damage caused by improper installation.

  • Page 15: Mounting In Portrait Position

    SA495-Y/SA555-Y 1.6. Mounting in Portrait Position This display can be installed in portrait position. 1. Remove the table stand, if attached. 2. Rotate 90 degrees counter-clockwise .

  • Page 16: Parts And Functions

    SA495-Y/SA555-Y Parts and Functions 2.1. Control Panel [ ] button Remote control sensor and power status indicator Use this button to turn the display on or put the display to standby. • Receives command signals from the remote control. • Indicates the operating status of the display without OPS: [MUTE] button - Lights green when the display is turned on Switch the audio mute ON/OFF. - Lights red when the display is in standby mode [INPUT] button - Lights amber when the display enters APM mode Choose the input source. - When {SCHEDULE} is enabled, the light blinks green and red • Used as [ ] button in the On-Screen-Display menu.

  • Page 17: Input/Output Terminals

    SA495-Y/SA555-Y 2.2. Input/Output Terminals AC SWITCH DVI IN DVI-I video input. DVI OUT AC IN DVI or VGA video output. AC power input from the wall outlet. DisplayPort IN / DisplayPort OUT HDMI1 IN / HDMI2 IN DisplayPort video input / output. HDMI video/audio input. MICRO USB IR IN / IR OUT Connector your USB storage device.. IR signal input / output for the loop-through function. MICRO SD CARD RJ-45 Connector MICRO SD CARD.

  • Page 18: Remote Control

    SA495-Y/SA555-Y 2.3. Remote Control [ ] POWER button Turn the display on or put the display to standby. 2.3.1. General functions [PLAY] buttons Control playback of media files.(for Media Input only) Freeze feature Pasue: Freeze hot key for all inputs content. Play: Unfreeze hot key for all input content. ] SOURCE button Root Menu: Go to Video source OSD. ] HOME button Root Menu: Go to Main Menu OSD. Others: Exit OSD.
  • Page 19 SA495-Y/SA555-Y ] INFO button Show Information OSD. [ ] OPTIONS button No function. [ ] [ ] VOLUME button Adjust volume.

  • Page 20: Id Remote Control

    SA495-Y/SA555-Y 2.3.2. ID Remote Control Press [ID] button. The red LED blinks twice. 1. Press [ID SET] button for more than 1 second to enter the ID Mode. You can set the remote control ID when you want to use this remote The red LED lights up. control on one of several different displays. Press the [ID SET] button again will exit the ID Mode. The red LED lights off. Press the digit numbers [0] ~ [9] to select the display you want to control. For example: press [0] and [1] for display No.1, press [1] and [1] for display No.11. The numbers available are from [01] ~ [255]. 2. Not pressing any button within 10 seconds will exit the ID Mode. 3. If an error pressing of buttons other than the digits occured, wait 1 second after the red LED lights off and then lights up again, then press the correct digits again. 4. Press [ENTER] button to confirm. The red LED blinks twice and then lights off.

  • Page 21: Remote Control Buttons On Android

    3. When playing PDF, video or music, press to stop playing. Then if pressing again, playing will be started from the beginning of the file. 4. When playing PDF, video or music, press button to pause playing. 5.All meida or pdf files should be put at the folder, which is named “asus” with sub-folder, under the root directory of the specified storage (internal/USB/SD Card). All sub-folders (video/photo/music/pdf) are named by media types and shouldn’t be changed. videos: {root dir of storage}/asus/video/ photos: {root dir of storage}/asus/photo/ music : {root dir of storage}/asus/music/ pdfs : {root dir of storage}/asus/pdf/...
  • Page 22 SA495-Y/SA555-Y NAVIGATION buttons ] INFO button 1. Navigate through menus and choose items. 1. Display information about current input signal. It is shown by Scalar. 2. In the content of the web page, these buttons are to control the 2. Media Player -> Compose -> edit or new add playlist -> choose any media files -> press to show the information of the chosen scroll bar of the screen. Press or is for moving vertical scroll media file. bar up or down. Press or is for moving horizontal scroll [ ] OPTIONS button bar left or right.

  • Page 23: Inserting The Batteries In The Remote Control

    SA495-Y/SA555-Y 2.3.4. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting. Be sure to follow these instructions: • Place “AAA” batteries matching the (+) and (–) signs on each battery to the (+) and (–) signs of the battery compartment. • Do not mix battery types. • Do not combine new batteries with used ones. It causes shorter life or leakage of batteries. • Remove the dead batteries immediately to prevent them from liquid leaking in the battery compartment. Don’t touch exposed battery acid, as it can damage your skin.

  • Page 24: Connecting External Equipment

    SA495-Y/SA555-Y Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using HDMI video input DVD / VCR / VCD HDMI Out [HDMI IN] 3.2. Connecting a PC 3.2.1. Using DVI-I input VGA Out D-Sub 15 pin [DVI-I IN] Audio Out...

  • Page 25: Using Dvi Input

    SA495-Y/SA555-Y 3.2.2. Using DVI input Audio Out DVI Out [DVI IN] [VGA AUDIO IN] 3.2.3. Using HDMI input HDMI Out [HDMI IN] 3.2.4. Using DisplayPort input DisplayPort Out...

  • Page 26: Connecting Audio Equipment

    SA495-Y/SA555-Y 3.3. Connecting Audio Equipment 3.3.1. Connecting an external audio device Audio In Stereo Amplifier [AUDIO OUT] 3.4. Connecting Multiple Displays in a Daisy-chain Configuration You can interconnect multiple displays to create a daisy-chain configuration for applications such as a video wall. NOTE: Maximum 25 displays (5x5) can be used in a DVI daisy-chain configuration. 3.4.1. Display control connection Connect the [RS232 OUT] connector of DISPLAY 1 to the [RS232 IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2...

  • Page 27: Analog Video Connection

    SA495-Y/SA555-Y Connect the [DP OUT] connector of DISPLAY 1 to the [DP IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DP] [DP IN] [DP OUT] [DP IN] Connect the [DVI OUT ] connector of DISPLAY 1 to the [DVI IN] connector of DISPLAY 2. DVD / VCR / VCD DISPLAY 1 DISPLAY 2 [HDMI] [DVI IN] [DVI OUT] [DVI IN] 3.4.3. Analog video connection Connect the [DVI OUT /DVI-I OUT] connector of DISPLAY 1 to the [DVI-I IN] connector of DISPLAY 2. DISPLAY 1 DISPLAY 2 [DVI-I]...

  • Page 28: Ir Connection

    SA495-Y/SA555-Y 3.5. IR connection External IR Receiver DISPLAY 1 DISPLAY 2 [IR IN] [IR OUT] [IR IN] NOTE: T his display’s remote control sensor will stop working if the [IR IN] is connected. 3.6. IR Pass-through Connection DVD / VCR / VCD [IR OUT] [IR IN] (DVD / VCR / VCD)

  • Page 29: Operation

    SA495-Y/SA555-Y Operation • Admin mode will show four icons: “Settings”, “Apps”, “Network”. • When you leave admin mode, system will return to last source. NOTE: T he control button described in this section is mainly on the remote control unless specified otherwise. 1)Home page of admin mode, this page has four items: “Settings”, “Apps”, “Network”. 4.1. Watch the Connected Video Source Settings : go to settings app.

  • Page 30: Signage Display

    SA495-Y/SA555-Y 5.2. Wi-Fi 4) Wi-Fi page: Via Enable/Disable to control Wi-Fi On/OFF. After Enable, the screen will list all available WiFi AP. Note : Ethernet will be disable automatically if Wifi turn on and connect to network . 5 ） Ethernet page 5.3. Ethernet Via Enable/Disable to control Ethernet on/off. After enable Ethernet, it will display: (1) Connect Type (available type is DHCP/Static IP) A. DHCP B. Static IP C. IP Address Signage Display D. Netmask E.

  • Page 31: Static Ip

    SA495-Y/SA555-Y 5.3.2. Static IP 5.4.1. General Settings Under StaticIP, User can manually input IP Address, Netmask, DNS Address 1. Signage Display Name and Gateway. Set up PD name “PD_” + Ethernet Mac Address. Note: Note: IP address, netmask, DNS address and gateway address input limitation Input limitation: (1)Format: (1) length: Max 36 characters I. number 0-9 (2) format: no limit II. decimal point “. ”...
  • Page 32 SA495-Y/SA555-Y 2) When boot logo selection, PD will check if there is bootanimation. zip under USB and SD c a r Case 3 The user settle customized boot logo, The screen will show /data/ Function introduction: local/bootanimation.zip a. Option description /data/local Use customized boot animation file which is copied from SD card or /mnt/external_sd Use boot animation file under SD card /mnt/usb_storage Use boot animation file under USB b. Save Press Save key to save SD card or USB bootanimation.zip to /data/ local and set it as boot logo. c. Forget 3) If OSD menu Logo item is On or Off, the users cannot choose Press Forget key to delete /data/local bootanimation.zip and not boot animation in Android settings. show boot logo. d. Cancel Close dialogue w/o changes.
  • Page 33 SA495-Y/SA555-Y 1) Interval 4)Repeat Set up interval timeframe. 30 mins or 60 mins. Set screenshot repeat cycle. User can choose screenshot time frame. (Multiple selection) 2) Start Time 5)Save to Set up screenshot start time. Set up screenshot save path. Internal storage, SD card or USB Note: storage. (1) No Cancel, Confirm button in dialog. Note: (2) Just press Back key to exit dialog for Set up Picture storage path: (3) Start time cannot be newer than End time. It will show Error (1) In root of internal storage/usb storage/sd card, PD will create toast. folder automatically. (2) The picture will save to ASUS/Screenshot/. 3) End Time Set up screenshot End time.

  • Page 34: Server Settings

    SA495-Y/SA555-Y I. English a-z and A-Z II. Number 0-9 FTP password display (1) Will show “*” symbol to instead password if set up passwork via remote control. (2) After set up, the password text will show as “*” symbol. Before password input: 5.4.2. Server Settings 1. FTP Via Enable/Disable to control FTP On/Off. After set up, PD can share FTP files. After password input: 1) Account Email Setup FTP account Set up completed screen: Note: Input limitation (1) Length: 4-20 characters (2) Format: I. English a-z and A-Z II.

  • Page 35: Source Settings

    SA495-Y/SA555-Y 4) Port (2) Open Media Player slideshow effect edit page. Set up FTP port number.Default: 2121 Note: Input limitation (1) Length: Max 5 characters (2) Range: 1-65535 (3) Format: I. Number 0-9 (4) Do not use the port: 5000 2. Browser Can edit Browser configuration. 5.4.3. Source Settings 1. Media Player Can Edit Media Player play list and effect settings. (1) Open Browser setting page. (1) Open Media Player Player List edit page. 3. PDF Player Can edit PDF Player Play List and Effect Settings.
  • Page 36 SA495-Y/SA555-Y (1) Open PDF Player Player List edit page. 4.2 Function Introduction Save (2) Open PDF Player effect edit page. Select the App, click the Save will perform the function of storage. Forget After press the Forget, can remove previously stored information. Cancel Don’t do any change, directly closed Windows. If no customer installed apk, the list will be blank. The list will be blank and “Save””Forget” will be gray and useless. 4. Custom app User can set up the application for Customer Source Note: (1) Only display User Installed app. (2) Will not show up system pre-install app. 4.1 OSD Menu operation: RCU: Source -> Custom If set up customer APK, PD will open customer app when switch source to Customer mode. If customer installed apk,user can select customer installed apk in list • Case 1: Not set up Custom App case. If no set up customer APK, PD will show Black screen when switch source to Customer mode.

  • Page 37: System Tools

    SA495-Y/SA555-Y After set up, the setting screen display the app name. 5.5.1. Clear Storage The purpose is to clear all data in ASUS folders. Divided into 4 mode: (1) Clear all ASUS folder (2) Only clear ASUS folder under Internal storage. (3) Only clear ASUS folder under USB storage. (4) Only clear ASUS folder under SD card. Pop-up the window to display all folders which can be clear. • Case 2: Set up Custom App case(there is entity circle to the right of icon) 5.5.2. Factory Reset Factory Reset can recover to Factory default settings. 5.5. System Tools System tools 4 main functions: (1) Navigation Bar (only for touch model) (2) Clear Storage (3) Factory Reset (4) Import & Export Press OK to execute Reset function automatically .

  • Page 38: Import & Export

    SA495-Y/SA555-Y SD CARD and USB STORAGE : 5.5.3. Import & Export Need to insert SD card or USB, the information will show up total The function of Import & Export PD settings. space and available of SD card or USB storage. Note: (1) Saved file name: settings.db (2) Will save to folder in storage. 1. Export Will export settings.db to ASUS folder under USB or SD card. Note: If no folder exists in USB or SD card, it will be created automatically. 5.7. Apps Display applications information. 2. Import Import settings.db from folder under USB or SD card. 5.8. Date & time Via Scalar OSD menu to control Auto Time on/off.

  • Page 39: Developer Options

    SA495-Y/SA555-Y After select update.zip file, PD will restart and start to update. 5.9. Developer options 5.11. Supplementary Android developer options. 5.11.1. Rotation Via Scalar OSD menu to operate Rotation: Home -> Configuration2 -> Rotation -> OSD rotation 1. Landscape After set up Landscape mode, the setting screen will divide into 2 part. Select Left item, right side will display the sub menu. 5.10. About Main info in About: (1) System updates (2) Android version (3) Kernel version (4) Build number 2. Portrait After set up Portrait mode, the setting screen only display one layer. 5.10.1. System updates Will automatically search update.zip in USB or SD card.

  • Page 40: Media Player Introduction

    3. Select “Compose” on home page, first you should choose one playlist Info key – show media info. to edit between FILE 1 and FILE 7 The pencil icon means the playlist is Ok key – select/unselect file. non-empty. 6.1 Once you start to edit a playlist, you will see below screen. (1) select all : select all storage files. (2) delete all : delete all playlist files. (3) add/remove : update playlist from source. (4) sort : sort playlist. (5) save/abort : save or abort playlist. (6) back : return. 4. If an empty playlist is chosen, the app will guide you to select the media source. All media files should be placed in /asus/ of root directory. For example, videos in /root/asus/video/ photos in /root/asus/photo/ music in /root/asus/music/...

  • Page 41: Browser Introduction

    SA495-Y/SA555-Y 7. if you choose “Sort” in the slidebar, you can change the order of files Mode”, “Slideshow Effect” and “Effect Duration”. one by one. (1) Repeat Mode : play mode. (2) Slideshow Effect : photo slideshow effect. (3) Effect Duration : photo effect duration. 8. Press info key after you choose desired file, you will get the detail information. 12. Media Hotkey: (1) Play : Playback file. (2) Pause: Pause file. (3) Fast forward: forward 20 second. (photo not support) (4) Rewind: back 20 second. (photo not support) (5) Stop: Stop file and return to start.
  • Page 42 SA495-Y/SA555-Y c. Choose file contains urls 3. Press “Option” then left side will pop up a list (1) Import : Import url list file d. Import file and url will show on list (2) Export : Export url list file (3) Delete all : Delete all url record on right side (4) Back : left side list will be close. e. File format for import Format should be like below with file extension “txt” 4.1 Once you start to edit a playlist, you will see below screen. a. Click import www.asus.com www.google.com www.yahoo.com b. Choose storage...

  • Page 43: Pdf Player Manual

    SA495-Y/SA555-Y 4.2 Export: a. Click export b. Choose storage 7. OSD menu interaction with Browser 8.1 Boot on source a. Set OSD menu => Confiuration1 => Boot on source => Input be BROWER c. Dialog shows path file will be saved and file’s name. Play List be 0. Press “save” button then urls on list will be saved. Then PD will show Browser after reboot. b. Set OSD menu => Confiuration1 => Boot on source => Input be BROWER Play List be 1. Then PD will show web page with 1st Url in Browser app. 8.2. Schedule Set OSD menu => Advanced option => Schedule => On time1, Off time2, Input be BROWSER, any day you want of week, and Play List.
  • Page 44 Info key – show media info. Ok key – select/unselect file. 6.1 In the slidebar, it helps you to do the following: (1) select all : select all storage files. (2) delete all : delete all playlist files. (3) add/remove : update playlist from source. (4) sort : sort playlist. (5) save/abort : save or abort playlist. (6) back : return. 4. If an empty playlist is chosen, the app will guide you to select the media source. All media files should be placed in /asus/ of root directory. For example, - pdfs in /root/asus/pdf/ 7. if you choose “Sort” in the slidebar, you can change the order of files one by one.
  • Page 45 SA495-Y/SA555-Y Press OK key, the bottom of the page will show the page number, if page number over total page number, it will not change page and show 8. Select “Settings” on home page, this page has two parts, “Repeat current page number at the bottom of the page. Mode” and “Effect Duration”. (1) Repeat Mode : play mode. (2) Effect Duration : photo effect duration. 9. Media Hotkey: (1) Play : Playback file. (2) Pause: Pause page. (3) Fast forward: go to next page, if the page is end of the file, it will go to next file.

  • Page 46: Osd Menu

    SA495-Y/SA555-Y OSD Menu 6.2. OSD Menu Overview An overall view of the On-Screen Display (OSD) structure is shown 6.2.1. Picture menu below. You can use it as a reference for further adjusting your display. 6.1. Navigating the OSD Menu       6.1.1. Navigating the OSD menu using the   remote control    ...

  • Page 47: Screen Menu

    SA495-Y/SA555-Y Zoom mode 10000º 9300 º 7500 º 6500 º 5000 º 4000 º 3000 º PC mode: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}. 0.279 ± 0.283 ± 0.299 ± 0.313 ± 0.346± 0.382± 0.440± Video mode: {Full} / {4:3} / {1:1} / {16:9}/ {21:9}/ {Custom}. 0.030 0.030...

  • Page 48: Audio Menu

    SA495-Y/SA555-Y Auto adjust Audio source Press “Set” to detect and adjust H position, V position, Clock, Phase Select the audio input source. automatically. Analog: audio from audio input Screen reset Digital : audio from HDMI/DVI audio. Reset all settings in the Screen menu to factory preset values. Displyport: audio from DP. Select “Yes” and press “SET” button to restore the factory preset data. Sync. Volume Press “EXIT” button to cancel and then return to the previous menu. Enable/disable audio out (line out) volume adjustability. Audio reset 6.2.3. Audio menu Reset all settings in the Audio menu to factory preset values.   6.2.4. PIP menu ...

  • Page 49: Configuration1 Menu

    SA495-Y/SA555-Y PIP reset Panel saving Reset all settings in the PIP menu to factory preset values. Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. The PIP function is available only for certain signal source combinations as shown in the table below. • {Brightness} - Select {On} and the image brightness will be reduced to an appropriate level. The Brightness setting in the Picture menu will Medoa PDF HDMI1 HDMI2 DisplayPort Browser Custom be unavailable when selected. Player Reader HDMI1 • {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds HDMI2 / {Off}) for the display to slightly expand the image size and shift the position of pixels in four directions (up, down, left, or right). DisplayPort RS232 routing...

  • Page 50: Configuration2 Menu

    SA495-Y/SA555-Y Monitor ID 6.2.6. Configuration2 menu Set the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number when multiple     sets of this display are connected. Monitor ID number range is between       1 to 255.    Heat status      This function allows you to check the thermal status of the display at     any time.

  • Page 51: Advanced Option Menu

    SA495-Y/SA555-Y Main: {Off}, {On} when value is onn, Main window screen rotate 90 °, display. To unlock, press and hold the [ ] INFO button on the Off is restored. remote control for 6 (six) seconds. Sub: {Off}, {On} when value is on, Sub1 Window screen rotate 90 °, Off Keyboard control is restored. Choose to enable or disable the display keyboard (control buttons) * When the Main / Sub source is the same, rotation is given priority to function. with Sub. • {Unlock} - Enable the keyboard function. * Not suupored De-Interlacing function in rotation mode. • {Lock All} / {Lock all but Volume} / {Lock all but Power} / {Lock all Language except PWR &...
  • Page 52 SA495-Y/SA555-Y display by their ID number when multiple displays are connected. Example: 5 x 5 screen matrix (25 displays) The options are: {Off / Auto / 2 ~ 255} H monitors = 5 displays V monitors = 5 displays • {Brightness.}: {Normal}/{ACS} {Normal}: Apply OSD brightness value (backlight) H monitors {ACS}: Apply brightness value (backlight) which is adjusted by user color adjust tool. The default value before adjustment is the same as OSD Position brightness value, e.g.,70) Some brightness (backlight) settings cannot be adjusted by OSD. Please refer to Picture Menu Backlight setting priority.
  • Page 53 SA495-Y/SA555-Y critical moment in time (eg march 29, 2009, 02.00 o’clock: time will be NOTES: set 1 hour later or October 25, 2009, 02.00 o’clock: time will be set 1 • If the schedules overlap, the scheduled power-on time takes priority hour earlier). over scheduled power-off time. Schedule • If there are two schedule items programmed for the same time, the highest numbered schedule takes priority. For example, if schedule This function allows you to program up to 7 (seven) different scheduled items #1 and #2 both set the display to power on at 7:00 AM and time intervals for the display to activate. off at 5:00 PM, then only schedule item # 2 will take effect. You can select: HDMI with One Wire • The time for the display to turn on and turn off.
  • Page 54 SA495-Y/SA555-Y DC off shutdown 1. The current source APK(such as MediaPlayer, Browser, PDF or Custom) will be closed. 2. Android system will go to the default black launcher. DC on Boot up Android system reboots Scalar FW Update Update scalar FW by USB. USB cloning Copy PD settings from one set to another. Import: Copy settings from file to display Export: Copy PD settings into file. Advanced option reset Reset all settings except {Date and Time} in the Advanced option menu to factory preset values.

  • Page 55: Usb Device Compatibility

    SA495-Y/SA555-Y USB device compatibility USB Multimedia Codec formats Video Decode Type Video Codec Container Decode Encode Channel Remark Supported Image Size:48x48pixels to 1920x1088pixels Maximum Frame Rate:30fps MPEG1/2 MPEG1/2 File Format: DAT, MPG, VOB, TS Maximum Bit Rate:80Mbps Audio Codec: MP2, MP3 Supported Image Size:48x48pixels to 1920x1088pixels Maximum Frame Rate:30fps Maximum Bit Rate:38.4Mbps File Format: AVI, MKV, MP4, MOV,...
  • Page 56 SA495-Y/SA555-Y Image Decode Type Image Codec Photo Decode Encode Channel Remark JPEG JFIF file format 1.02 File Format: JPG, JPEG Decode: Resolution 48X48 to 8176X8176 (1) Not Support Non-interleaved Scan (2) Software support SRGB JPEG (3) Software support Adobe RGB JPEG File Format: BMP MaximumSupported Image Size:4096x4096 pixels File Format: GIF Resolution No Restriction File Format: PNG Resolution No Restriction NOTES: • Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in the table above. • Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback.

  • Page 57: Input Mode

    SA495-Y/SA555-Y Input Mode VGA Resolution: Active Resolution Standard Refresh Rate Pixel Rate Aspect Ratio Stand for Mode Resolution H Pixels V Lines 60 Hz 25.175 MHz 480 72 Hz 31.5 MHz Video Graphic Array 75 Hz 31.5 MHz WVGA 400 70 Hz 33.75 MHz 16:9 Wide Video Graphic Array 60 Hz 40 MHz SVGA 600 Super VGA 75 Hz 49.5 MHz 60 Hz 65 MHz 1024 768 Extended Graphic Array 75 Hz 78.75 MHz...

  • Page 58: Pixel Defect Policy

    We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but ASUS guarantees that any Plasma- & LCD- displays with an unacceptable number of defects will be repaired during the warranty period in line with your local guarantee conditions. This notice explains the different types of pixel defects and defines the acceptable defect level for the LCD screen. In order to qualify for repair under warranty, the number of pixel defects must exceed a certain level as shown in the reference table. If the LCD screen is within specification a warranty exchange / claim back will be refused. Additionally, because some types or combinations of pixel defects are more noticeable than others, ASUS sets even higher quality standards for those. 9.1. Pixels and Sub-Pixels A pixel, or picture element, is composed of three sub-pixels in the primary colors of red, green and subpixel blue.

  • Page 59: Dark Dot Defects

    Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot Two adjacent dark dots = 1 pair of dark dots Two dark dots, specifications defines the minimum distance between dark dots 9.5. Proximity of Pixel Defects Because pixel and sub-pixels defects of the same type that are nearby one another may be more noticeable, ASUS also specifies tolerances for the proximity of pixel defects. In the table below you can find specifications about: • Allowed amount of adjacent dark dots = (adjacent dark dots =1 pair of dark dots) • Minimum distance between dark dots • Total no. of all defective dots 9.6. Pixel Defect Tolerances In order to qualify for repair due to pixel defects during the warranty period, a PDP / TFT panel in a ASUS Plasma / LCD- display must have pixel or sub- pixel defects exceeding the tolerances listed in the following table.

  • Page 60: Cleaning And Troubleshooting

    SA495-Y/SA555-Y Cleaning and Troubleshooting 10.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close. Placing any object near the top of the display could also result in heat related damage to the object as well as the display itself. • Be sure to disconnect all cables before moving the display. Moving the display with its cables attached may damage the cables and thus cause fire or electric shock. • Disconnect the power plug from the wall outlet as a safety precaution before carrying out any type of cleaning or maintenance procedure. Front Panel Cleaning Instructions • The front of the display has been specially treated. Wipe the surface gently using only a cleaning cloth or a soft, lint-free cloth.

  • Page 61: Troubleshooting

    SA495-Y/SA555-Y 10.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the 2. Make sure the power switch is switched on. display is not switched on. 3. Connect a signal connection to the display. 3. The selected input has no connection. 4. The display is in standby mode. Interference displayed on the display or audible...

  • Page 62: Technical Specifications

    SA495-Y/SA555-Y Technical Specifications Display:SA495-Y Item Specifications Screen Size (Active Area) 48.5” (123.2 cm) diagonal LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.55926 (H) x 0.55926 (V) [mm] Displayable colors 8bits(D),16.7 Million colors Brightness (typical) 450 cd/m (typ) Contrast ratio (typical) 1100:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω 1 Way 1 Speaker System 82 dB / W / M / 160 Hz ~ 13 KHz Audio Output Phone Jack x 1 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input 3.5 mm Stereo x 1 0.5V [rms] (Normal) / 2 Channel (L+R) RS232 2.5mm Phone jack x 2...
  • Page 63 SA495-Y/SA555-Y General: Item Specifications Internal memory 16GB eMMC (12GB usable) Power Supply AC 100 - 240V, 50 - 60Hz Power Consumption (Max) 113 W Power Consumption (typ.) 65 W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (Without Stand) [W x H x D] 1097.6 x 633.9 x 45.5 mm Weight (Without Stand) 14.70 Kg Gross Weight (Without Stand) 19.80 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Storage / Shipment...
  • Page 64 SA495-Y/SA555-Y Display:SA555-Y Item Specifications Screen Size (Active Area) 54.64 Inches (1387.80 mm) diagonal LCD Aspect Ratio 16:9 Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.630 (H) x 0.630 (V) [mm] Displayable colors 8bits(D),16.7 Million colors Brightness (typical) 450 cd/m (typ) Contrast ratio (typical) 1100:1 Viewing angle 178 degrees In/Out Terminals: Item Specifications Speaker Output Internal Speakers 10W (L) + 10W (R) [RMS]/8Ω 1 Way 1 Speaker System 82 dB / W / M / 160 Hz ~ 13 KHz Audio Output Phone Jack x 1 0.5V [rms] (Normal) / 2 Channel (L+R) Audio Input 3.5 mm Stereo x 1 0.5V [rms] (Normal) / 2 Channel (L+R) RS232 2.5mm Phone jack x 2 RS232 in / RS232 out...
  • Page 65 SA495-Y/SA555-Y General: Item Specifications Internal memory 16GB eMMC (12GB usable) Power Supply AC 100 - 240V, 50 - 60Hz Power Consumption (Max) 139 W Power Consumption (typ.) 76 W Power Consumption (Standby & Off) <0.5W (RS232 in active) Dimensions (Without Stand) [W x H x D] 1233.4 x 710.3 x 45.5 mm Weight (Without Stand) 18.0 Kg Gross Weight (Without Stand) 24.3 Kg Environmental Condition: Item Specifications Temperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude Operational 0 ~ 3,000 m Storage / Shipment...

This manual is also suitable for:

Sa495-y

Table of Contents