Panic Keys; Using Panic Keys - Honeywell VISTA-128FBPT User Manual
Commercial fire and burglary partitioned security systems with scheduling
Hide thumbs
Also See for VISTA-128FBPT:
- User manual (81 pages) ,
- Installation and setup manual (104 pages) ,
- Quick manual (6 pages)
Table of Contents
Using Panic Keys
Your system may have been programmed to use special key combinations to
manually activate panic functions. The functions that might be programmed
are Silent Emergency, Audible Emergency, and Personal Emergency. See
your installer for the function(s) that may have been programmed for your
system.
Active Panic Functions
(Your installer should note which
function(s)
is
active
system.)
Keys
Zone
1 and *
995
3 and #
996
* and #
999
A
995
B
999
C
996
A silent emergency sends a silent alarm signal to the central station, but
there will be no audible alarms or visual displays.
An audible emergency sends an emergency message to the central station
(if connected) and will sound a loud, steady alarm at your keypad and at any
external sounders that may be connected (ALARM plus a zone number
would also be displayed).
A personal emergency alarm sends an emergency message to the central
station (if connected) and will sound at Keypads, but not at external
Notification Appliance Circuits. (ALARM plus a zone number would also be
displayed.)
National Security Systems (800)457-1999
(For Manually Activating Silent and/or Audible Alarms)
in
your
Function
http://nationalsecuritysystems.com
Panic Keys
To use a paired key panic function,
simply press both keys of the assigned
pair at the same time.
If your keypad(s) have lettered keys for
panic functions, press the designated
key and hold down for at least 2 seconds
to
activate
the
panic
function.
– 43 –
Table of Contents
