Service Position; G Board Removal; D2 Board Removal; D Board Removal - Sony FD TRINITRON KV-28FQ86E Service Manual

Ae-6ba chassis

Hide thumbs Also See for FD TRINITRON KV-28FQ86E:

Table of Contents

2-4. Service Position

To place the chassis in the service position, insert the main

bracket firmly into the T-slot located on the left corner of the

beznet as indicated (see inset). To gain access to the underside

of the boards follow the instructions on page 17. [Removal

and Replacement of the main bracket bottom plates].

Screws

To remove the D2 board remove the two screws circled,

release the clips circled and ease the board gently away from

the support bracket.

All manuals and user guides at all-guides.com

Clips

- 15 -

Clips

To remove the G Board remove the two screws from the

middle of the board, release the clips circled and ease the

board gently away from the support bracket.

Screws

Clips

To remove the D board first remove the D2 bracket by

removing the two screws circled and releasing the four

clips (two on each side of the bracket). The D board can

then be removed using the same method as the G board

but with the necessity to remove only one screw from the

middle of the D board.