Introduction
This product is not designed to be waterproof. Do not expose this product to liquids such as sweat, rainwater or seawater.
Product, Accessory and Part Names (A)
- Controller
* The microphone is built in. - Eartips (SS, S, M, L, LL) 1 set each
* The M-size eartips are attached.
Preparation
Charging (B)
With the included USB power cable, connect the charging connector on the earphones to the USB port on a commercially available USB power adaptor (5 V DC/min. 0.5 A output).
Making a Bluetooth® connection (C)
When using the earphones for the first time, the pairing process, which allows Bluetooth devices being connected to detect each other, must be performed. Once paired, the Bluetooth devices will be automatically connected the next time they are turned on.
Pairing
- Hold down the function key for at least five seconds to enter pairing standby.
- Operate the connected Bluetooth device to display the Bluetooth setting screen.
- Select "Yamaha EP-E50A" from the displayed screen.
For details on use, refer to the website.
Turning on/off
Hold down the function key on the controller for two seconds to turn the earphones on/off.
Basic operations
Listening to music
| Play | Briefly press the function key once. |
| Pause | During playback, briefly press the function key once. |
| Raise the volume | Briefly press the + key once. |
| Lower the volume | Briefly press the – key once. |
| Skip to the next song | Hold down the + key for two seconds. |
| Go back to the beginning of the song, or skip to the previous song | Hold down the – key for two seconds. |
| Enable/disable AMBIENT SOUND and noise cancellation | Press the ANC key. |
Using the phone
| Receive a phone call | When a phone call comes in, briefly press the function key once. |
| End a phone call | During the phone call, briefly press the function key once. |
| Raise the conversation volume | Briefly press the + key once. |
| Lower the conversation volume | Briefly press the – key once. |
| Ignore a call | When a phone call comes in, briefly press the function key twice. |
Specifications
| Bluetooth version | Version 5.0 |
| Supported profiles | A2DP, AVRCP, HFP, HSP |
| Supported codecs | SBC, AAC, Qualcomm® aptX ™ HD |
| RF Output Power | Class 1 |
| Maximum communication range | Approximately 10 m (without interference) |
| Number of devices that can be registered | Up to 8 devices |
| Internal rechargeable battery | Lithium-ion battery |
| Charging time | Approximately 2 hours |
| Continuous playback time | Approximately 9 hours (with ANC) |
| Charging temperature | 0 – 40°C |
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Yamaha Corporation is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
[Europe model]
Wireless communication functions
Bluetooth
Radio Frequency (Operational Frequency): 2402 MHz to 2480 MHz
Maximum Output Power (EIRP): 10 dBm
Yamaha Global Site https://www.yamaha.com/
Yamaha Downloads https://download.yamaha.com/
Manual Development Group
© 2020 Yamaha Corporation
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the EP-E50A that isn't answered in the manual? Leave your question here.