Panasonic VW-HU1 - Handle Unit Operating Instructions

Panasonic VW-HU1 - Handle Unit Operating Instructions

Panasonic VW-HU1 - Handle Unit Operating Instructions

Precautions

Thank you for purchasing this Panasonic product.

  • The following functions can be used when this product is attached to a 4K Video Camera HC-X1500:

Accessories

Check the accessories before using this unit.

  1. Microphone holder
  2. Microphone holder mounting screws

Names of the components

Names of the components

  1. Handle
  2. Microphone holder mounting section
  3. Microphone holder ( With a microphone holder attached)
  4. Buckle ( With a microphone holder attached)
  5. terminal (XLR, 3-pin)
  6. terminal (XLR, 3-pin)
  7. Microphone cable clamp
  8. switch
  9. CH1 SELECT switch
  10. CH2 SELECT switch
  11. switch
  12. switch
  13. switch
  14. Handle unit mounting screw
  15. Light cover
    • Keep the light cover out of reach of children to prevent swallowing.
  16. Built-in LED light
  17. Tally lamp
  18. Accessory shoe (on the handle)
  19. switch
  20. Hold lever
  21. REC button (on the handle)
  22. Accessory mounting hole
  23. Zoom lever (on the handle)
  24. Light dimmer dial

Attaching the handle unit

Attaching the handle unit

  • Attach while the power of the camera is turned off.
  1. Open the microphone holder.
    Open buckle , and detach fitting from hook .
  2. Attach the microphone holder to the microphone holder mounting section on the handle unit.
    Microphone holder mounting screws
    Microphone holder
    • There will be some rubbing noises with the rubber when screwing in the microphone holder mounting screws, but please ensure they are done up tightly.
  3. Push the handle unit into the handle unit mounting section on the camera.
    Match the positions of mounting mark on the handle unit and mounting mark on the camera when pushing in.
  4. Slide the handle unit in the direction indicated by the arrow.
    Slide up to mounting mark .
  5. While pressing the handle unit mounting screw down, turn it in the direction indicated by arrow until it stops.

How to remove
Remove by doing the steps for attaching in reverse.

Specifications

Power consumption: Maximum approx. 3.1 W (when connected to the camera)
External dimensions (W×H×D): Approx. 71 mm ×89 mm ×207 mm (including protrusions, excluding microphone holder)
Mass: Approx. 305 g (main part of the handle unit only, excluding microphone holder and microphone holder mounting screws)
The symbols on this product (including the accessories) represent the following: DC

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Table of Contents