Troubleshooting - Bosch KIV86 Series Information For Use

14 Troubleshooting

You can rectify minor faults on your appliance yourself. Read the troubleshoot-

ing information before contacting after-sales service. This will avoid unneces-

sary costs.

WARNING

Risk of electric shock!

Incorrect repairs are dangerous.

Repairs to the appliance should only be carried out by trained specialist

▶

staff.

Only use genuine spare parts when repairing the appliance.

▶

If the power cord of this appliance is damaged, it must be replaced with a

▶

special connection cable, which is available from the manufacturer or his

Customer Service.

Fault

The appliance is not

cooling, the displays

and lighting are lit.

The LED lighting does

not work.

The temperature dif-

fers greatly from the

setting.

The base of the refri-

gerator compartment

is wet.

The appliance hums,

bubbles, buzzes,

gargles or clicks.

The appliance makes

noises.

Cause and troubleshooting

Showroom mode is switched on.

Carry out the appliance self-test. → Page 25

▶

a Once the appliance self-test has ended, the appli-

ance switches to normal operation.

Different causes are possible.

Call customer service.

▶

The customer service number can be found in the

enclosed customer service directory.

Different causes are possible.

Switch off the appliance. → Page 15

1.

Switch the appliance back on after five minutes.

2.

→ Page 15

If the temperature is too warm, check the temper-

‒

ature again after a couple of hours.

If the temperature is too cold, check the temper-

‒

ature again on the following day.

The condensation channel or drainage hole are

blocked.

Clean the condensation channel and the drainage

▶

hole. → Page 21

Not a fault. A motor is running, e.g. refrigerating unit,

fan. Refrigerant flows through the pipes. The motor,

switches or solenoid valves are switching on or off.

No action required.

Fittings wobble or stick.

Check the removable fittings and, if required, re-

▶

place these.

Troubleshooting en

23