Table of Contents
Quick Links
Basic Connection
Basic Connection
How to use stand (For 42PC3DU/3DVU)
Place the set with the screen facing down on
1
a cushion or soft cloth as shown.
Before unfolding the stand, please make sure
two locks (A) on the bottom of the stand push
outward.
When connecting cables to the set, Do not
3
disengage the lock (C).
This may cause the set to fall, causing serious
bodily injury and serious damage to the set.
How to arrange the cable (For 50PC3DU)
Hold the CABLE MANAGEMENT with both
1
hands and push it as shown.
3
Reinstall the CABLE MANAGEMENT as
shown.
2
(A)
* Image shown here may be slightly different from
When closing the stand for storage
- First remove the screws in the holes (B) on the bottom
(C)
- After folding, push the two Locks (A) of the stand
2
Pull the stand out as shown.
After unfolding the stand, please insert and
tighten the screws (provided as parts of the
product) in the holes (B) on the bottom of the
stand.
your set.
of the stand. And then pull two Hooks (D) of the stand
bottom and fold the stand into the back of the set.
bottom outward.
Connect the cables as necessary.
To connect an additional equipment, see the
External equipment Connections section.
For 60PC1D, 42PC3DU/3DVU
Arrange the cable as shown.
(B)
(A)
(B)
(D)
17
Table of Contents
Related Manuals for Zenith 42PC3DU
Summary of Contents for Zenith 42PC3DU
- Page 1 Basic Connection Basic Connection How to use stand (For 42PC3DU/3DVU) Place the set with the screen facing down on Pull the stand out as shown. a cushion or soft cloth as shown. After unfolding the stand, please insert and tighten the screws (provided as parts of the...
-
Page 2: External Equipment Connections
Installation External Equipment Connections External Equipment Connections NOTE: All cables shown are not included with the TV Antenna Or Cable Connection Analog and Digital TV signals provided on antenna - Antenna or Cable Service without a Cable Box Connection. - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket... -
Page 3: Vcr Setup
Installation VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. -
Page 4: When Connecting With An S-Video Cable
Installation AUDIO VIDEO OPTICAL DIGITAL AUDIO S-VIDEO VIDEO AUDIO When connecting with an S-Video cable Connect the S-VIDEO output of the VCR to the S- ANT IN VIDEO input on the set. The picture quality is improved; compared to normal composite (RCA S-VIDEO OUT ANT OUT (R) AUDIO (L) VIDEO... -
Page 5: Dvd Setup
HDMI / DVI IN ANTENNA/ CABLE IN AUDIO VIDEO Installation DVD Setup When connecting with a S-Video cable (R) AUDIO (L) S-VIDEO AUDIO AUDIO VIDEO VIDEO OPTICAL PTICAL MONO DIGIT DIGITAL AL AUDIO AUDIO S-VIDEO S-VIDEO VIDEO VIDEO AUDIO AUDIO Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. - Page 6 Installation When connecting with a component cable (R) AUDIO (L) HDMI / DVI IN ANTENNA/ CABLE IN AUDIO AUDIO VIDEO Connect the video outputs (Y, P ) of the DVD to the COMPONENT IN VIDEO jacks on the set. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the set. Turn on the DVD player, insert a DVD.
-
Page 7: Hdstb Setup
Installation HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. When connecting with a HDMI cable SERVICE SERVICE... - Page 8 1(DVI) RS-232C IN (CONTROL & SERVICE) AUDIO VIDEO Installation OPTICAL DIGITAL AUDIO S-VIDEO VIDEO AUDIO When connecting with a HDMI to DVI cable SERVICE SERVICE RGB IN RGB IN (PC) (PC) AUDIO IN AUDIO IN REMOTE REMOTE (RGB/DVI) (RGB/DVI) CONTROL IN CONTROL IN HDMI IN HDMI IN...
-
Page 9: Av Out Setup
Installation AV Out Setup - The TV has a special signal output capability which allows you to hook up a second TV or monitor. VIDEO VIDEO AUDIO AUDIO Connect the second TV or monitor to the TV’s AV OUT jacks. See the Operating Manual of the second TV or OPTICAL PTICAL... -
Page 10: When Connecting With A D-Sub 15 Pin Cable
RGB IN (PC) AUDIO IN REMOTE (RGB/DVI) CONTROL IN Installation RS-232C IN (CONTROL & SERVICE) PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable Connect the RGB output of the PC to the RGB IN RGB IN (PC) - Page 11 Installation 1. Depending on the graphics card, DOS mode may 5. Check the image on your TV. There may be noise not work if a HDMI to DVI Cable is in use. associated with the resolution, vertical pattern, 2. When Source Devices connected with HDMI/DVI contrast or brightness in PC, HDMI/DVI mode.
-
Page 12: Screen Setup For Pc Mode
Installation Screen Setup for PC mode - When RGB connect to PC input and select the RGB-PC, this function is used. - When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used. - After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality. * Adjustment for screen Resolution, Position, Size, and Phase FLASHBK EZ PIC... -
Page 13: Basic Operation
Operation Operation Operation Basic operation Basic operation Turning on the TV 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , INPUT, CH button on the TV or press the POWER, TV INPUT, INPUT, CH , Number (0 ~ 9) button on the remote control . -
Page 14: How To Adjust The Osd Screen
Operation On Screen Menus Selection and Adjustment On Screen Menus Selection and Adjustment How to adjust the OSD screen 1. Press the MENU button and then button to select each menu. 2. Press the button and then use D D / E E / F F / G G button to display the available menus. -
Page 15: Setup Menu Options
Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan EZ Scan Selection ( leads you to the EZ Manual Scan Manual Scan scan screen. Channel Edit Channel Edit Processing EZ scan... DTV Signal DTV Signal TV Ch.20 Input Source Input Source 0 channel(s) found...