Table of Contents
12
Connecting
Connecting the AC
Adapter
Connect the speaker to the power supply with the
supplied AC adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
>
Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
Wireless subwoofer
connection
LED indicator of wireless subwoofer
LED Color
Status
Green
The connection is trying.
(Blink)
Green
The connection is completed.
Red
The wireless subwoofer is
in standby mode or the
connection is failed.
Off (No
The power cord of wireless
display)
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED or the blinking of green LED on
the wireless subwoofer and the subwoofer does
not make sound. To solve the problem, follow the
below steps.
1. Adjust volume level of the main unit to
minimum.
- "VOL MIN" appears on the display window.
2. Press and hold
(Mute) on the remote control
for about 3 seconds.
- "WL RESET" appears on the display window
briefly.
Table of Contents
