Combining Units And Options; Possible Options For The Outdoor Unit - Daikin EBLA04E2V3 Installer's Reference Manual
Hide thumbs
Also See for EBLA04E2V3:
- Installation manual (52 pages) ,
- User reference manual (68 pages)
Table of Contents
5.2 Combining units and options
5.2.1 Possible options for the outdoor unit
EBLA04~08E2V3+E23V3 + EDLA04~08E2V3+E23V3
Daikin Altherma 3 M
4P685228-1A – 2022.05
INFORMATION
Certain options may NOT be available in your country.
Multi-zoning wired controls
You can connect the following multi-zoning wired controls:
▪
Multi-zoning base unit 230 V (EKWUFHTA1V3)
▪
Digital thermostat 230 V (EKWCTRDI1V3)
▪
Analogue thermostat 230 V (EKWCTRAN1V3)
▪
Actuator 230 V (EKWCVATR1V3)
For installation instructions, see the installation manual of the control, and the
addendum book for optional equipment.
Room thermostat (EKRTWA, EKRTRB)
You can connect an optional room thermostat to the outdoor unit. This thermostat
can either be wired (EKRTWA) or wireless (EKRTRB).
For installation instructions, see the installation manual of the room thermostat
and addendum book for optional equipment.
Remote sensor for wireless thermostat (EKRTETSB)
You can use the remote indoor temperature sensor (EKRTETSB) only in
combination with the wireless thermostat (EKRTRB).
For installation instructions, see the installation manual of the room thermostat
and the addendum book for optional equipment.
Digital I/O PCB (EKRP1HBAA)
The digital I/O PCB is required to provide following signals:
▪
Alarm output
▪
Space heating/cooling ON/OFF output
▪
Changeover to external heat source
For installation instructions, see the installation manual of the digital I/O PCB and
addendum book for optional equipment.
Demand PCB (EKRP1AHTA)
To enable the power saving consumption control by digital inputs you MUST install
the demand PCB.
For installation instructions, see the installation manual of the demand PCB and
addendum book for optional equipment.
Remote indoor sensor (KRCS01-1)
By default the internal sensor of the dedicated Human Comfort Interface
(BRC1HHDA used as room thermostat) will be used as room temperature sensor.
As an option the remote indoor sensor can be installed to measure the room
temperature on another location.
5
About the units and options
|
Installer reference guide
21
- Quick Links:
- Table of Contents
- General
- Electrical
Hide quick links:
Table of Contents
