Heat Sink - HP ProBook x360 11 G6 Education Edition Maintenance And Service Manual

Table 5-10

Heat sink spare part information

Description

Heat sink (includes replacement thermal material)

Before removing the heat sink, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then

unplugging the AC adapter from the computer.

4.

Remove the keyboard/top cover (see

5.

Remove the battery (see

6.

Disconnect the system board (see

Remove the heat sink:

1.

Remove the four Phillips M2.0×3.3 screws (1) that secure the heat sink to the system board.

2.

Remove the heat sink (2).

Each time the heat sink is removed, thoroughly clean the thermal material from the processor component (1)

and the surface of the heat sink (2). Replacement thermal material is included with the heat sink and system

board spare part kits.

Keyboard/top cover on page

Battery on page

39).

System board on page

Spare part number

M00725-001

28).

48).

Component replacement procedures

51