Table of Contents
1B-12 Mechanical (6HK1)
1. Cylinder head cover
2. Head cover gasket
3. Lower cover
20. Injector harness removal
1.
Remove the connector from the lower cover.
Caution：
・ Do not pull the wire, or pry the connector with
a screwdriver.
2.
Disconnect the injector harness from the injector.
Caution：
・ Be careful not to damage the injector side stud
bolts.
1. Injector
2. Injector harness
3. Terminal nut
3.
Remove the injector harness from the cylinder head
assembly.
Note：
・ Remove the bracket tightening bolts and then
remove the injector harness together with the
bracket.
1. Injector harness terminal
2. Injector harness bracket
21. Lower cover removal
1.
Remove the lower cover from the cylinder head
assembly.
2.
Remove the rubber plug from the cylinder head
assembly.
22. Injector removal
- Quick Links:
- Installation
- Cylinder Head Assembly
Hide quick links:
Chapters
Table of Contents
