Quick Links
Model ET26B
4-Way Circuit
Tester
OPERATION
To check a circuit for voltage, insert the
test leads into outlet or carefully touch
test leads to the electrical contacts or
conductor to be tested. If voltage is
present, the neon indicator will light in
that range, indicating the voltage level
of the circuit. See Figure 1.
To test for the live side of a receptacle,
insert one probe into the ground post of
the receptacle while inserting the other
probe into the alternate slots of the
receptacle. The neon indicator will light
when the probe makes contact with the
live side of the outlet. See Figure 2
The unique design allows for easy one
hand testing of outlets. See Figure 3.
WARNING: Risk of Electric Shock. Always
check proper operation on a known working
circuit before using. Do not use outside of
marked/rated voltage.
CAUTION: Use extreme caution when
checking electrical circuits to avoid injury due
to electrical shock. FLIR Systems, Inc.
assumes basic knowledge of electricity on
the part of the user and is not responsible for
any injury or damages due to improper use
of this tester.
ET20B-en-es-fr_V1.1 12/16
Products Online at:
USER MANUAL
For additional language translations please visit www.extech.com
GlobalTestSupply
www.
SPECIFICATIONS
DC Voltage Range: 120~240 volts
AC Volt. Range: 120~480V (50/60Hz)
Overvoltage class: CAT II 600V
OVERVOLTAGE CATEGORY II
Equipment of OVERVOLTAGE CATEGORY II is
energy-consuming equipment to be supplied
from fixed installation
Double Insulation: The meter is
protected by double insulation
or reinforced insulation.
Copyright © 2016 FLIR Systems, Inc.
All rights reserved including the right of reproduction in
whole or in part in any form
ISO-9001 Certified
www.extech.com
Modelo ET26B
Probador de circuitos de 4 vías
OPERACIÓN
Para probar voltaje, inserte los cables
de prueba en el enchufe o toque los
contactos eléctricos o conductor a
probar. Si hay voltaje presente, el
Indicador neón se iluminará en esa
escala, indicando el nivel de voltaje del
circuito.
Para probar el lado con corriente de un
enchufe, inserte una punta en el poste
de tierra del enchufe y la otra en las
ranuras alternas del enchufe. El
indicador neón brilla cuando el detector
hace contacto con el lado con corriente
del enchufe.
ADVERTENCIA: Riesgo de choque eléctrico.
Siempre verifique la operación en un circuito
en funcionamiento antes de usar. No use
fuera de los voltajes nominales.
.com
MANUAL DEL USUARIO
sales@GlobalTest
Related Manuals for Extech Instruments ET26B
Summary of Contents for Extech Instruments ET26B
- Page 1 SPECIFICATIONS USER MANUAL DC Voltage Range: 120~240 volts AC Volt. Range: 120~480V (50/60Hz) Model ET26B Overvoltage class: CAT II 600V 4-Way Circuit OVERVOLTAGE CATEGORY II Tester Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be supplied from fixed installation...
- Page 2 Gamme de tensions DC : 120 à 240 V MANUEL D’UTILISATION Gamme de tensions AC : 120 à 480 V (50/60Hz) Modèle ET26B Classe de surtension : CAT II 600 V Testeur de circuit à 4 voies CATÉGORIE DE SURTENSION II Les appareils appartenant à...