Samsung SWA-W510 - Subwoofer Manual

CHECKING THE COMPONENTS

NOTE

CONNECTING THE SOUNDBAR

1. Check the standby status after plugging into an electrical outlet.
   Plug the Subwoofer power cord into an electrical outlet and into the Subwoofer to turn on the Subwoofer. The LINK LED indicator (blue LED) on the Subwoofer blinks. If the LED does not blink, refer to step 5.
   
   
2. Turn off the Soundbar
   Turn off the Soundbar using the Soundbar's remote control.
   • The image of the Soundbar may differ from your Soundbar, depending on the model.
     
     
     
     Soundbar LED Indicator:
     
     
3. Configure "ID SET" using the Soundbar's remote control
   Press the Up button on the Soundbar remote control for 5 seconds.
   • The ID SET message appears on the Soundbar main unit's display for a short time and then disappears.
   • After the ID SET process, the Soundbar power is automatically turned on.
   • Until pairing is complete, the Multicolour LED on the Soundbar changes as "Red → Green → Blue" in turn.
     
4. Check if the LINK LED is solid blue (connection complete)
   The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Subwoofer.
   
   LINK LED - Blue is On:
   
   
5. If the SWA-W510 does not connect, take the necessary steps according to the LED Indicator's status

LINK (Blue) On: Successfully connected (normal operation).

LINK (Blue) Blinking: Recovering the connection.

STANDBY (Red) On:

• Standby (with the Soundbar main unit turned off). – Check if the power cable attached to the main Soundbar unit is connected properly.
• Connection failed
  1. Press the ID SET button on the back of the Surround Speakers with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue).
     
     Rear of Subwoofer
     

Red and blue Blinking: Malfunction

COMPATIBLE MODELS

• Compatible with select Samsung Soundbar. Please visit the Soundbar product page at www.samsung.com/ support for more information.

OPEN SOURCE LICENSE NOTICE

To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)

IMPORTANT NOTES ABOUT SERVICE

• An administration fee may be charged if either

SPECIFICATIONS AND GUIDE

Specifications:

Subwoofer Name - SWA-W510
Weight - 6.4 kg
Dimensions (W x H x D) - 238.0 x 240.8 x 238.0 mm
Operating Temperature Range - +5°C to +35°C
Operating Humidity Range - 10% ~ 75 %
AMPLIFIER Rated Output power - 200 W
Overall Standby Power Consumption (W) - 2.0 W
WIRELESS DEVICE OUTPUT POWER SRD max transmitter power - 25mW at 5.725GHz – 5.825GHz

NOTE:

Documents / Resources

References

• Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
• Samsung Open Source

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.