Table of Contents
TROUBLESHOOTING
3) When the Display Panel converts to the Option Setting mode, the entire Display except the Fridge as shown below Temp
LED goes off.
[External Display]
3-1) For example, if you want to shift the standard temp of the Fridge/Freezer compartment by -2°C, follow the steps below.
This function is to change the default temperature and when the default temperature of the RR* is 3°C (RZ* is -19°C)
and the default setting is lowered by -2°C with the Option function, the default temperature will be controlled at RR* is
1°C (RZ* is -21°C).
That is, when changing temperature options, the Fridge/Freezer compartment will operate at RR* : 1°C (RZ* : -21°C)
internally even if it shows 3°C (RZ* is -19°C) on the display panel. Therefore, the temperature will be controlled by -2°C
lower than the set temperature on the display panel.
Note. Basically, when units being shipped out, all the data in the Option function are cleared.
That is, the Default settings are "0". However, for the purpose of quality improvement during mass production,
the Default values may change. Therefore, be sure to check quality information, such as SVC bulletins.
[Internal Display]
OPTION VALUE
OPTION ITEM
TEMP SHIFT
67
Control Lock Icon
7-SEG DISPLAY
ON
0
Table of Contents
