Thank you for purchasing our product. We are confident that you will appreciate the quality of the product and you will be entirely satisfied with your purchase. Please read carefully the user safety and operating instruction on how to operate this product correctly within safety norms and regulations.
Page 4
We recommend that you purchase your accessories from the same store that sold you the tool. Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store person- nel can assist you and offer advice.
2.GENERAL SAFETY INSTRUCTIONS WARNING! When using electrical tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instructions. 1.
Keep handles dry, clean and free from oil and grease. 15. Disconnect tools When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools from the power supply. 16. Remove adjusting keys and wrenches Form the habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on.
Page 7
• Keep the power cord well away from the grinding area during use. Always position the cord so that it will not be caught in the workpiece when the grinder is in use. • Always wear earmuffs, safety glasses and face mask while in operation. •...
4. SPECIFICATIONS Voltage/Frequency: 230V~50Hz Model: DABG150 Power: 200 W Aluminium Motor Speed: 2950 rpm Wheel size: Ø150x16x Ø12.7 mm Cord: 1.65 m visible Base: Aluminium Motor housing: Steel Class: I Degree of protection: IP20 Duty type: S2 30 min 5. OPERATING INSTRUCTIONS Note: Before using the power tool, read the instruction manual carefully.
Page 9
from the socket. • To reduce the risk of injury, never use a grinder on which the tool rest has not been fitted or where the tool rest has not been correctly adjusted. 1) Hold the tool rest in the correct position against the inner surface of the wheel guard. 2) Insert bolt through wheel guard and tool rest, followed by a washer, spring washer, and locking knob.
Follow the manufacturers instructions of the wheel dresser. 2) Adjust the tool rest to allow the front part of the wheel dresser to fit between the tool rest and wheel. 3) Start the motor and move the dresser across the front of the wheel a sufficient number of times until the surface is level.
fast prepare for this. Wear safety glasses/face shield, a dust mask, earplugs, a leather apron, and heavy leather boots 4.Grasp the workpiece firmly and properly support it on the tool rest during grinding. Maintain even pressure and control of the workpiece when grinding. 5.