Table of Contents
Section 700 - Operation
• Calls can be forwarded to a third-party voice mail (a system other than the
• Beginning with CPC-AII and CPC-B Version 7.0, all call types can be
Call Hold
(All Versions)
Description
The HOLD key provides either exclusive or system hold, depending on
system programming. With Exclusive Hold, only the extension that held the
call can retrieve it. With System Hold, another extension can retrieve the call.
Operation
To place a call on Hold:
Press the HOLD key.
To release the call:
Press the HOLD key again.
Related Programming
• FF1 (System): Non-appearing Central Office Line Hold
• FF1 (System): Recall Timer for Extension-Held Intercom Calls
• FF1 (System): Recall Timer for Extension-Held CO Calls
• FF1 (System): Trunk Line Automatic Hold (Key Bank Hold)
Considerations
• A held call will recall if it is not retrieved before the Hold Recall Timer
DBS-2.3/9.2-700
DBS Voice Mail) by using the "Call Forward ID Code" described on page
3-13.
forwarded outside using speed dials. However, if Least Cost Routing is
activated, dial "9" trunks cannot be used. Select another trunk group
instead (81-86).
expires.
DBS Manual - Revised April 2000
Chapter 5. DSLT Features
5-11
Hide quick links:
Table of Contents
