Table of Contents
Quick Links
Table of Contents
Related Manuals for Bosch WTH84000GB
Summary of Contents for Bosch WTH84000GB
- Page 1 Tumble dryer WTH84000GB [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety ........... 4 9 Programmes ...... 23 1.1 General information.... 4 9.1 Automatic programmes... 23 1.2 Intended use...... 4 9.2 Timed programmes .... 24 1.3 Restriction on user group.. 4 10 Accessories...... 26 1.4 Safe installation ...... - Page 3 15.2 Base unit ....... 34 15.3 Moisture sensor..... 36 16 Troubleshooting...... 38 17 Transportation, storage and disposal ........ 42 17.1 Preparing the appliance for transportation ...... 42 17.2 Disposing of old appliance ... 42 18 Customer Service.... 43 18.1 Product number (E-Nr.) and production number (FD)..
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance. -
Page 12: Energy Saving Mode
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a Damper laundry extends the pro- gramme duration and increases energy consumption. 4.1 Unpacking the appliance Observe the programme's maximum ATTENTION! load capacity. Objects remaining in the drum that → "Programmes", Page 23 are not designed for operation with a If the maximum load is exceeded,... -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 26 result in damage to the appliance. Immediately after transporting the ▶... -
Page 14: Water Drain Hose
en Installation and connection hose to drain away excess condens- Installation loca- Requirements ation directly into the waste water tion system. In a washer-dryer Only use the ori- Notes stack ginal connection ¡ Operate this appliance using the set from the water drain hose provided. - Page 15 Installation and connection en Pull out the condensation hose Push the water drain hose as far from the connecting piece. as it will go into the connecting piece. The condensation hose is connec- ted to the connecting piece at the Insert the water drain hose into the factory.
-
Page 16: Aligning The Appliance
en Installation and connection Water outlet connection types Secure the elbow to the gully. ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶ 4.5 Aligning the appliance sure that the wastewater drains away quickly and eliminate any In order to reduce vibrations and... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Door Maintenance flap on the base Condensation container... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 23 Programme selector → Page 27 Display → Page 19 Buttons → Page 21... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 24 Programme end → "Buttons", Page 21... -
Page 20: Dryness Level
en Display Display Designation Description Fluff filter Clean the fluff filter → Page 28. Filter system on Clean the filter system on the base unit the base unit → Page 30. Drying Programme status Dryness level: Iron Programme status Dryness level: Programme status Cupboard Dry Anti-crease Programme status Pause... - Page 21 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3 sec. ¡ Activate Activate or deactivate the childproof lock. ¡ Deactivate Disable the control panel to prevent unwanted or accidental operation.
-
Page 22: Changing The Dryness Level
en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Dry Multi-layered, thick laundry The laundry is dry. Plus that does not dry readily. -
Page 23: Programmes
Programmes en 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 24: Timed Programmes
en Programmes Programme Description Max. load (kg) ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme. → "Timed programmes", Page 24 Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. - Page 25 Programmes en Programme Description Max. load (kg) Timed Program Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. The programme duration is 30 minutes.
-
Page 26: Preparing The Laundry
en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 43. Order number Connection kit To save space, stack the WTZ20410 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 27: Basic Operation
operation en ¡ Remove curtain fittings and lead 12.4 Starting the programme strips Requirement: A programme is set. ¡ Wash small or particularly delicate → "Setting a programme", Page 27 items in a mesh washing bag ¡ Load the laundry unfolded into the Press Start/Reload . ▶... -
Page 28: Cancelling The Programme
en operation Remove the fluff from the door. 12.7 Cancelling the pro- gramme Press Start/Reload . Open the door. Remove the laundry. → "Unloading the laundry", Page 28 12.8 Unloading the laundry Open the door. Remove the laundry from the Remove the two-part fluff filter. drum. - Page 29 operation en Disconnect the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and then dry them off. Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Close the door.
-
Page 30: Filter System On The Base Unit
en operation Use a soft brush to clean the heat 12.11 Filter system on the exchanger cover. base unit During drying, fluff from the laundry is collected in the base unit's filter sys- tem. The filter system protects the ap- pliance from fluff. Cleaning the filter system on the base unit If the display shows a notification... -
Page 31: Condensation Container
operation en Push the filter mat onto the retain- Requirements ers. ¡ The display shows the following after drying: "End" ¡ or the display shows the following during operation: Pull out the condensation con- tainer, keeping it level. Ensure that the cleaned filter mat is not deformed, damaged or in- verted when you push it onto the retainers. -
Page 32: Childproof Lock
en Childproof lock Inserting the condensation container Push the condensation container ▶ in as far as it will go. 13 Childproof lock Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two 3 sec. ▶... -
Page 33: Basic Settings
Basic settings en 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 34: Changing The Basic Set- Tings
en Cleaning and servicing 14.2 Changing the basic set- nothing but water and a damp tings cloth. Set the programme selector to po- Remove all de- Fresh deposits sition 1. tergent residue, are easier to re- spray residue or move without other residues leaving any immediately. - Page 35 Cleaning and servicing en Open the lever for the heat ex- Use a soft brush to clean the heat changer cover. exchanger cover. Make sure that you remove all dirt Pull out the heat exchanger cover from the seal. by the handle. Carefully clean the fins on the heat exchanger with a vacuum cleaner and brush attachment.
-
Page 36: Moisture Sensor
en Cleaning and servicing Clean the opening with a soft, Close the maintenance flap. damp cloth. 15.3 Moisture sensor Close the base unit → Page 36. The moisture sensor in this appliance Closing the base unit measures how damp the laundry is Requirement: The base unit is open. during the drying cycle. - Page 37 Cleaning and servicing en Clean the moisture sensor with a sponge.
-
Page 38: Troubleshooting
en Troubleshooting 16 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 39 Troubleshooting en Fault Cause and troubleshooting Creasing. Set the suitable programme for the type of fabric. ▶ → "Programmes", Page 23 Easy-Care fabrics are dried for too long. → "Changing the dryness level", Page 22. ▶ → "Adjusting the dryness level", Page 22. ▶ Anti-Crease not activated. Activate the Anti-Crease function. ▶...
- Page 40 en Troubleshooting Fault Cause and troubleshooting The programme does → "Starting the programme", Page 27. not start. The length of the pro- The programme operation is optimised electronically. gramme changes dur- This may change the programme duration. ing the drying cycle. Not a fault – no action required. ▶...
- Page 41 Troubleshooting en Fault Cause and troubleshooting Water is leaking from Water drain hose is not connected correctly. the appliance. Ensure that the water drain hose is connected cor- ▶ rectly. → "Connecting the water drain hose", Page 14 The lever for the heat exchanger cover is not closed correctly.
-
Page 42: Transportation, Storage And Disposal
en Transportation, storage and disposal Empty the condensation container 17 Transportation, stor- → Page 31. age and disposal Insert the condensation container → Page 32. Disconnect the appliance's mains 17.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 43: Customer Service
Customer Service en Information about current disposal 18.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate. - Page 44 en Consumption values 19 Consumption values The Cottons Eco programme The actual values may deviate from (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying in the fabric, set degree of dryness,...
-
Page 45: Technical Data
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cottons Iron Dry 12.0 1400 1:40 0.91 Cottons Iron Dry 12.0 1000 3:02... - Page 48 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.