Panasonic KX-TGEA40 Digital Cordless Handset Manual

Also See for KX-TGEA40:

Installation manual (17 pages)

Table of Contents

Contents

1 Introduction
2 Accessory information
3 For your safety
4 Important safety instructions
5 Other information
6 Setting up
7 FCC and other information
8 Documents / Resources
- 8.1 Download manual

Panasonic KX-TGEA40 Digital Cordless Handset Manual

Introduction

This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phone: KX-TGE430/KX-TGE440/KX-TGE460/KX-TGE470
(The corresponding models are subject to change without notice.)
You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit's operating instructions for further details.

Please read this installation manual before using the unit and save it for future reference.
For assistance, visit our Web site: http://shop.panasonic.com/support for customers in the U.S.A.

Accessory information

Supplied accessories

Accessory item/Part number	Quantity
Charger^*1	1
Rechargeable batteries/HHR-4DPA	2
Handset cover^2, ^3	1
Belt clip^*4	1

*1 PNLC1050ZB (Black), PNLC1050ZS (Silver)
*2 The handset cover comes attached to the handset.
*3 PNYNTGEA20BR (Black), PNYNTGEA20SR (White)
*4 PNKE1312Z2 (Black), PNKE1312Z1 (White)

Note:

Please read the base unit's operating instructions for additional/replacement accessories.

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

burn hazard
Power connection

Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at http://shop.panasonic.com/support

Installation

To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

Installation and location

Battery

We recommend using the supplied batteries or additional/replacement batteries noted for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.

Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY
(1-800-822-8837) for information on how to recycle this battery.

Important safety instructions

burn hazard shock hazard
When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

SAVE THESE INSTRUCTIONS

Other information

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Routine care

Wipe the outer surface of the product with a soft moist cloth.

Notice for product disposal, transfer, or return

Setting up

Connections/Wall mounting

Drive the screws ( ) (not supplied) into the wall, if necessary. 27.2 mm (1 ¹/16 inches)

Note:

Battery installation/Battery charging

USE ONLY rechargeable Ni-MH batteries AAA (R03) size ( ).
Confirm correct polarities ( , ).

Charge for about 7 hours.

Confirm "Charging" is displayed ( ).
When the batteries are fully charged, "Fully charged" is displayed.

Note:

If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( , ) and the charge contacts with a dry cloth and charge again.