Setting The Diskette Drive Type(S) - Epson Equity 386SX User Manual
Hide thumbs
Also See for Equity 386SX:
- Product support bulletin (26 pages) ,
- Product information manual (10 pages) ,
- User manual (337 pages)
Table of Contents
8.
If you want to change the hard disk settings for drive 2,
press -+ and return to step 4.
9. When the hard disk drive settings are correct, press ? to
move the cursor block into the top submenu. Highlight
** SAVE SETTINGS
hard disk drive configuration. The main Setup menu
appears.
Setting the Diskette Drive Type(s)
Your Equity 386SX comes with one factory-installed diskette
drive. If you removed the installed drive or added a second
diskette drive, you need to change the diskette drive settings to
match your configuration. If you haven't made any changes, you
can verify the drive type settings. Follow these steps:
1.
At the main Setup menu, highlight
The current settings appear:
Each diskette drive is followed by its specific type (360KB,
720KB, 1.2MB, or 1.44MB). If the diskette drive types on
the screen match your diskette drive configuration, you can
skip the rest of this section.
Running the Setup Program
2-22
* * and press
Enter
Diskette drive.
to save your
Table of Contents
