Idis DA-JB2300 Installation Manual

DA-JB2300 INSTALLATION MANUAL

Mounting

Mount the junction box to the wall or mounting bracket as follows:

Wall

Junction Box

Wall Hole

3/4" Cap

1

Insert cables from external devices, network and power adapter to the junction box.

2

Mount the junction box to the wall or mounting bracket by using the screws.

• Use the provided guide pattern to check the distance between the screw holes if necessary.

• If you want to insert cables through the bottom of the junction box, remove the 3/4" cap and

attach it to the wall hole.

Rubber

Mounting

Bracket

Junction Box

Cable

4

Route the cable from the camera through the rubber and then junction box. Attach the rubber

onto the junction box.

5

Fix the cables using the cable clamp.

6

Connect the cables from external devices, network and power adapter to each port of the

camera.

This manual is intended for users of the DA-JB2300 junction box. It

includes instructions for mounting the DA-JB2300 junction box to a wall.

• This junction box is intended to be used with DC-T series model

of camera. Do not use it with other models of cameras.

• This installation should be performed by a qualified service

personnel in conformance to all local codes.

• You may need to reinforce the wall. If the wall is not strong

enough to support the camera, the camera may fall.

• Do not use this product for other purposes.

Bracket

Cable

Cable Clamp

Cable

Rubber

Junction Box

Junction Box Cable

Cable

Rubber

Junction Box

Bracket

Junction Box Cable