Sony HS-MB1 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Home Automation
  5. HS-MB1
  6. Service manual
Sony HS-MB1 Service Manual

Sony HS-MB1 Service Manual

Distribution panel
Hide thumbs
Table of Contents

Quick Links

SERVICE MANUAL
Ver. 1.0 2009.02
• HS-AC1 is attached to HS-MB1.
Please refer to service manual of
HS-AC1 for information on HS-AC1.
Input and output terminals
RJ45: T568B Terminated. ABE (only for connection to HS-KP1
(Keypad))
(A DC 19.5 V included)
CD (only for connection to HS-WV1
(AV Wall Port))
(C DC 19.5 V included)
F (only for connection to CAV-CVB1
(Component Video Balun))
(DC 10 V included)
GH (only for connection to HS-WD1
(DIGITAL MEDIA Wall Port))
(G DC 19.5 V included)
40 pin fl at terminals:
For IDE cable (with pin 20 opening) only
(For stack connection only)
Pin jack video in:
For camera 1, 2 NTSC 75 ohms terminal
DC IN:
HS-AC1 only (not supplied)
10 V: by JEITA TYPE4 Jacks
19.5 V: by JEITA TYPE5 Jacks
DB1, DB2, CHIME:
Wire requirements: Copper Wire AWG 26 - 18
Outer diameter: 3 mm (0.12 inches), maximum
Strip away: 10 mm (0.4 inches)
RS-232C (DB9 Straight): For stack connection and service only
Sony Corporation
9-889-410-01
2009B04-1
Audio&Video Business Group
©
2009.02
Published by Sony Techno Create Corporation
SPECIFICATIONS
GENERAL
DC Power consumption (when HS-KP1, HS-WV1, HS-WA1,HS-WD1,
and CAV-CVB1 are not connected):
* Use DC 19.5 V for HS-KP1, HS-WV1, HS-WA1, HS-WD1, and
CAV-CVB1.
For details, refer to the instruction manual of each product.
* Use DC 10 V only for HS-MB1. Even if you connect the DC 10 V to
HS-MB1, no power is supplied HS-KP1, HS-WV1, HS-WA1, HS-
WD1, or CAV-CVB1.
Operating temperature:
Storage temperature:
Dimensions:
Mass:
Supplied accessories
HS-AC1
AC power cord (mains lead)
Installer's manual
Design and specifi cations are subject to change without notice.
HS-MB1
US Model
DC 19.5 V /0.6 A (ZONE 1 - 4), 0.1 A
(ZONE 5 - 8)
DC 10 V /0.3 A
0 ˚C - 30 ˚C (32 ˚F - 86 ˚F)
–20 °C - 60 °C (–4 °F - 140 °F)
290 × 250 × 55 mm
1
7
3
(11
/
× 9
/
× 21
/
inches) (w/h/d)
22
8
4
2 kg (4 lbs 6 1/2 oz.)
DISTRIBUTION PANEL
Table of Contents
loading

Summary of Contents for Sony HS-MB1

  • Page 1 For details, refer to the instruction manual of each product. (DC 10 V included) * Use DC 10 V only for HS-MB1. Even if you connect the DC 10 V to GH (only for connection to HS-WD1 HS-MB1, no power is supplied HS-KP1, HS-WV1, HS-WA1, HS- (DIGITAL MEDIA Wall Port)) WD1, or CAV-CVB1.

  • Page 2: Table Of Contents

    EXPLODED VIEW THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. 5-1. Main Section ..............41 REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY. ELECTRICAL PARTS LIST ......42...

  • Page 3: Service Note

    HS-MB1 SECTION 1 SERVICE NOTE NOTE FOR REPAIRING THE HS-MB1 The HS-MB1 cannot be repaired singly since it has no power supply. It should be connected with the HS-AC1 when servicing/repair- ing it. EXTENTION CABLE AND SERVICE POSITION When repairing or servicing this set, connect the jig (extention cable) as shown below.

  • Page 4: General

    If a CAT5 cable is connected to the wrong RJ45 terminal, units or devices CAT5 RJ45 Pinout connected to HS-MB1 may be damaged when you plug in the AC power cord. When you connect the Component Video Balun (CAV-CVB1), the...
  • Page 5 DC IN CAMERA ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8 cord is connected to the wall outlet and the HS-MB1 is engaged. 19.5V 19.5V 19.5V 19.5V 19.5V 19.5V 19.5V 19.5V Notes ●...
  • Page 6 ● The wiring can extend up to 300 feet when using AWG 22 wire. (manufactured by M&S) ● After connecting the HS-MB1 to the Keypad (HS-KP1) (not supplied), the Use 2-conductor cable for the connections between the HS-MB1 and the name of the Doorbell is displayed on the front panel display of the HS-KP1 and you can configure the settings for the Doorbell by the HS-KP1.
  • Page 7 ZONE EXPANSION OUT ZONE EXPANSION IN HS-MB1 (sub unit) Notes ● When connecting the additional Distribution Panel (HS-MB1) (sub unit), the When updating firmware the Keypad (HS-KP1) (not supplied) SOURCE 1 ~ 4 terminals of the sub unit cannot be used.

  • Page 8: Disassembly

    HS-MB1 SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. CASE (MB) (Page 8) 3-2. VIDEO BOARD (Page 9) 3-3. MAIN BOARD (Page 9) Note: Follow the disassembly procedure in the numerical order shown below.

  • Page 9: Video Board

    HS-MB1 3-2. VIDEO BOARD three screws (+BVTP 3 × 8) two screws (+BVTP 3 × 8) CN320 (10P) VIDEO board wire (flat type)(13 core) (CN903) wire (flat type)(18 core) (CN1110) wire (flat type)(26 core) (CN102) wire (flat type)(25 core) (CN705)

  • Page 10: Diagrams

    HS-MB1 SECTION 4 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards. For Schematic Diagrams. Note: Note: • All capacitors are in μF unless otherwise noted. (p: pF) 50 •...

  • Page 11: Block Diagram -Audio Select Section

    HS-MB1 4-1. BLOCK DIAGRAM – AUDIO SELECT Section – CN2501 (1/2) CN2502 (1/2) MIC-A MIC-A MIC-B MIC-B MONITOR MONITOR SOURCE-1-L SOURCE-1-L SOURCE-1-R SOURCE-1-R SOURCE-2-L SOURCE-2-L SOURCE-2-R SOURCE-2-R ZONE ZONE SOURCE-3-L SOURCE-3-L EXPANSION EXPANSION SOURCE-3-R SOURCE-3-R SOURCE-4-L SOURCE-4-L SOURCE-4-R SOURCE-4-R DMPORT-L...

  • Page 12: Block Diagram -Mic Select Section

    HS-MB1 4-2. BLOCK DIAGRAM – MIC SELECT Section – MIC SELECTOR MIC A SELECT SWITCH IC3100 IC3101 ZONE SW MIC_ZONE1 MIC_ZONE1-8 IN_1 SW OUT SECTION MIC_ZONE2 X-COM IN_2 MIC-A_I COUT (Page 14) AUDIO MIC_ZONE3 MIC-B_I IN_3 LOUT SELECT MIC_ZONE4 IN_4...

  • Page 13: Block Diagram -Video Select Section

    HS-MB1 4-3. BLOCK DIAGRAM – VIDEO SELECT Section – Pb-Y VIDEO SELECT IC500 CN501 CN500 Pb+1 Pb+1 Pb+1 1 IN1 OUT1 Pb-1 Pb-1 Pb-1 2 IN2 OUT2 Pb+2 OUT3 Pb-2 SOURCE 1 OUT4 Pb+3 Pr+1 Pr+1 OUT5 ZONE 1 Pb-3...

  • Page 14: Block Diagram -Zone Sw Section

    HS-MB1 4-4. BLOCK DIAGRAM – ZONE SW Section – ZONE5(1/2) ZONE1(1/2) CN708 (1/2) AUDIO AMP(Lch) AUDIO SELECT SWITCH Lch+5 ZONE_5_L IC710 IC726 IC700 IC717 IC722 AUDIO CN700 (1/2) ZONE_1_L ZONE_1_L IC720 OUTPUT Lch-5 SELECT Lch+1 -ZONE_8_L SECTION Q716-719 ZONE 5...

  • Page 15: Block Diagram -Rs-232C Section

    HS-MB1 4-5. BLOCK DIAGRAM – RS-232C Section – AUDIO SOURCE-1-L-SOURCE-4-L SELECT DMPORT-L SECTION (Page 11) ZONE1 (2/2) ZONE5 (2/2) SOURCE 1D RS232C TX AMP CN708 (2/2) AUDIO AMP AUDIO AMP IC300 CN700 (2/2) IC1111 IC1115 CN1105 CN1105 RS232C MB K TX+1...

  • Page 16: Block Diagram -Video Section

    HS-MB1 4-6. BLOCK DIAGRAM – VIDEO Section – CN2501 (2/2) CN2502 (2/2) IR+IN IR+IN_S IR-IN IR-IN_S C.VIDEO1+S C.VIDEO1+ ZONE C.VIDEO1-S C.VIDEO1- ZONE EXPANSION EXPANSION C.VIDEO2+S C.VIDEO2+ C.VIDEO2-S C.VIDEO2- RM_MONI+S RM_MONI+ RM_MONI-S RM_MONI- VIDEO AMP IC2301 C_VIDEO2+ CN302 CN308 C_VIDEO2- COMPOSITE+ VIDEO SELECT...

  • Page 17: Block Diagram -Power Section

    HS-MB1 4-7. BLOCK DIAGRAM – POWER Section – S901 DOOR 1 MODE SELECT DOOR1 SYSTEM CONTROL SECTION IC100 (7/7) DOOR2 (Page 12) DOOR BELL DOORBELL1 DET CONTROL CN100 Q2717,2721 CN902 RS232C_TX PORT1 RS232C_RX D2706 DOOR 1 (CN-A-JIG1) RESET LAMP1 JIG BUFFER LAMP CONTROL 3.3V...

  • Page 18: Printed Wiring Board -Main Section (1/2)

    HS-MB1 4-8. PRINTED WIRING BOARD – MAIN Section (1/2) – • : Uses unleaded solder. (Page 25) (Page 25) (Page 25) VIDEO BOARD VIDEO BOARD VIDEO BOARD CN102 CN1110 CN705 MAIN BOARD (SIDE A) R2703 • Semiconductor JL2300 JL2304 C3139...

  • Page 19: Printed Wiring Board -Main Section (2/2)

    HS-MB1 4-9. PRINTED WIRING BOARD – MAIN Section (2/2) – • : Uses unleaded solder. MAIN BOARD (SIDE B) JL2526 JL2516 RY2701 JL2522 JL2530 JL2529 J2300 JL2521 CAMERA JL2525 JL2533 RY2700 CN2300 RS-232C JL2329 JL2330 JL2328 JL2327 JL2325 JL2326 JL2324...

  • Page 20: Schematic Diagram -Main Section (1/5)

    HS-MB1 4-10. SCHEMATIC DIAGRAM – MAIN Section (1/5) – • See page 34 for IC Block Diagrams. MAIN BOARD (1/5) JL2103 JL2108 +18V D2102 D2103 IC2107 IC B/D 10EDB40-TB5 10EDB40-TB5 +3.3V +3.3V REG IC2107 SI-8033S MAIN BOARD (3/5) (Page 22)

  • Page 21: Schematic Diagram -Main Section (2/5)

    HS-MB1 4-11. SCHEMATIC DIAGRAM – MAIN Section (2/5) – • See page 34 for IC Block Diagrams. CN2502 CN2501 ZONE EXPANSION OUT ZONE EXPANSION IN CN2502 CN2501 MAIN BOARD (2/5) R2503 R2500 MAIN BOARD +3.3V R2502 (1/5) (Page 20) R2501 100 0.5%...

  • Page 22: Schematic Diagram -Main Section (3/5)

    HS-MB1 4-12. SCHEMATIC DIAGRAM – MAIN Section (3/5) – • See page 34 for IC Block Diagrams. MAIN BOARD (3/5) CN2793 CL2717 CM_2 CL2718 CM_COM CL2719 CM_1 CL2721 CL2720 LAMP2 R2726 CL2722 VIDEO CAP2 CL2723 BOARD DOOR2 (2/7) MAIN +7V_3...

  • Page 23: Schematic Diagram -Main Section (4/5)

    HS-MB1 4-13. SCHEMATIC DIAGRAM – MAIN Section (4/5) – • See page 34 for IC Block Diagrams. MAIN BOARD (4/5) +7V_2 +7V_3 MAIN BOARD (1/5) +7V_1 (Page 20) JL2918 R2913 JL2956 C2917 C2920 C2922 220p R2936 C2949 C2952 C2916 C2918...

  • Page 24: Schematic Diagram -Main Section (5/5)

    HS-MB1 4-14. SCHEMATIC DIAGRAM – MAIN Section (5/5) – • See page 34 for IC Block Diagrams. MAIN BOARD (5/5) MAIN DOOR_SP1 BOARD DOOR_SP2 (3/5) (Page 22) DOOR_SP_SW_A MAIN DOOR_SP_SW_B BOARD DOOR_SP_SW_C (2/5) DOOR_SP_SW_INH (Page 21) R3107 0.5% MAIN R3140...

  • Page 25: Printed Wiring Board -Video Section (1/2)

    HS-MB1 4-15. PRINTED WIRING BOARD – VIDEO Section (1/2) – • : Uses unleaded solder. (Page 18) (Page 18) (Page 18) MAIN BOARD CN2793 MAIN BOARD CN2510 MAIN BOARD CN2975 VIDEO BOARD (SIDE A) CL924 JL724 JL720 JL712 JL708 JL704...

  • Page 26: Printed Wiring Board -Video Section (2/2)

    HS-MB1 4-16. PRINTED WIRING BOARD – VIDEO Section (2/2) – • : Uses unleaded solder. VIDEO BOARD (SIDE B) • Semiconductor Location (Side B) Ref. No. Location Ref. No. Location Ref. No. Location JL1121 D103 D1104 IC722 JL905 JL1123 D318...

  • Page 27: Schematic Diagram -Video Section (1/7)

    HS-MB1 4-17. SCHEMATIC DIAGRAM – VIDEO Section (1/7) – VIDEO BOARD (1/7) SOURCE_1_L C1108 IC1111 INPUT 0.01 INPUT SOURCE_1_R IC1108 IC1111 SOURCE 4 SOURCE 1 AUDIO AMP NJM4565M(TE2) VIDEO IR+IN RS232C TX AMP BOARD R1105 R1117 21.3 R1162 R1216 IR-IN 6.8k...

  • Page 28: Schematic Diagram -Video Section (2/7)

    HS-MB1 4-18. SCHEMATIC DIAGRAM – VIDEO Section (2/7) – VIDEO BOARD (2/7) CN900 VIDEO BOARD CM_2 R902 (7/7) CM_2 (Page 33) CM_COM R903 CHIME CM_COM CM_1 CN903 R904 CM_1 CL917 CM_2 CL918 CM_COM CN901 CL919 CM_1 CL915 CL916 LAMP2 R900...

  • Page 29: Schematic Diagram -Video Section (3/7)

    HS-MB1 4-19. SCHEMATIC DIAGRAM – VIDEO Section (3/7) – • See page 10 for Waveform. • See page 36 for IC Block Diagrams. • See page 37 for IC Pin Function Description. VIDEO BOARD (3/7) (Page 30) VIDEO VIDEO POW_LED_SW...

  • Page 30: Schematic Diagram -Video Section (4/7)

    HS-MB1 4-20. SCHEMATIC DIAGRAM – VIDEO Section (4/7) – (Page 27) VIDEO DM_C_VIDEO+ BOARD DM_C_VIDEO- (1/7) (Page 27) VIDEO BOARD BUS4 VIDEO IR-IN (3/7) BOARD (Page 29) DM_DET IR+IN (1/7) VIDEO BOARD (4/7) D317 IR-IN_S D316 VIDEO IR+IN_S BOARD (3/7)

  • Page 31: Schematic Diagram -Video Section (5/7)

    HS-MB1 4-21. SCHEMATIC DIAGRAM – VIDEO Section (5/7) – • See page 35 for IC Block Diagrams. VIDEO (Page 30) BOARD BUS9 VIDEO BOARD (5/7) IC704 IC706 IC B/D IC700 (4/7) VIDEO MIC AMP AUDIO AMP(Rch) (Page 29) MIC_ZONE1 AUDIO SELECT SWITCH...

  • Page 32: Schematic Diagram -Video Section (6/7)

    HS-MB1 4-22. SCHEMATIC DIAGRAM – VIDEO Section (6/7) – • See page 35 for IC Block Diagrams. VIDEO (Page 30) BOARD BUS8 VIDEO BOARD (6/7) IC720 IC722 IC B/D IC717 (4/7) VIDEO MIC AMP AUDIO AMP(Rch) (Page 29) MIC_ZONE5 AUDIO SELECT SWITCH...

  • Page 33: Schematic Diagram -Video Section (7/7)

    HS-MB1 4-23. SCHEMATIC DIAGRAM – VIDEO Section (7/7) – • See page 36 for IC Block Diagrams. (Page 30) OUTPUT ZONE 1 ZONE 2 ZONE 3 ZONE 4 VIDEO BOARD (4/7) (Page 30) VIDEO BOARD (4/7) CN500 CN502 CN505 CN507...
  • Page 34 HS-MB1 • IC Block Diagrams IC2106 SI-8050S-LF1101 (MAIN Board (1/5)) IC2706 NJM2113D (MAIN Board (3/5)) IC2900 R2S15206FP (MAIN Board (4/5)) IC2901 R2S15206FP (MAIN Board (4/5)) IC2902 R2S15206FP (MAIN Board (4/5)) IC3100 R2S15206FP (MAIN Board (5/5)) CD 1 VOUT2 OVER BIAS...
  • Page 35 HS-MB1 IC3101 TC4052BFT(EL,N) (MAIN Board (5/5)) IC3102 TC4052BFT(EL,N) (MAIN Board (5/5)) IC3104 TC4052BFT(EL,N) (MAIN Board (5/5)) 11 12 14 15 16 IC3103 TC4053BF(EL,N) (MAIN Board (5/5)) IC700 TC4053BF(EL,N) (VIDEO Board (5/7)) IC701 TC4053BF(EL,N) (VIDEO Board (5/7)) IC702 TC4053BF(EL,N) (VIDEO Board (5/7))
  • Page 36 HS-MB1 IC106 BR24L64F-WE2 (VIDEO Board (3/7)) 64kbit EEPROM ARRAY 13bit ADDRESS SLAVE/ WORD DATA DECODER ADDRESS REGISTER REGISTER CONTROL CIRCUIT HIGH-VOLTAGE POWER SUPPLY GENERATOR VOLTAGE DETECTOR IC500 FMS6501MSA28X (VIDEO Board (7/7)) IC501 FMS6501MSA28X (VIDEO Board (7/7)) IC502 FMS6501MSA28X (VIDEO Board (7/7))
  • Page 37 HS-MB1 • IC Pin Function Description VIDEO BOARD (3/7) IC100 MB91F467RAPMC-GE1 (SYSTEM CONTROL) Pin No. Pin Name Description — Ground STOP IN Power supply cut detect signal input 3 to 5 NO USE Not used. (Open) I2C_SDA I2C SDA signal input/output...
  • Page 38 HS-MB1 Pin No. Pin Name Description ZONE1 MIC/AU SW A ZONE 1 (9) mic/audio switch (TC4053) A signal output ZONE1 MIC/AU SW B ZONE 1 (9) mic/audio switch (TC4053) B signal output ZONE1 MIC/AU SW C ZONE 1 (9) mic/audio switch (TC4053) C signal output VCC3 —...
  • Page 39 HS-MB1 Pin No. Pin Name Description DOOR SP SW A Doorbell 1/2 speaker enable switch (TC4053) A signal output DOOR SP SW B Doorbell 1/2 speaker enable switch (TC4053) B signal output DOOR SP SW C Doorbell 1/2 speaker enable switch (TC4053) C signal output...
  • Page 40 HS-MB1 Pin No. Pin Name Description BURN IN MODE Burn in mode control signal output NO USE Not used. (Open) KEYPAD5 RX Keypad 5 communication RX signal input KEYPAD6 RX Keypad 6 communication RX signal input KEYPAD7 RX Keypad 7 communication RX signal input...

  • Page 41: Exploded View

    HS-MB1 SECTION 5 EXPLODED VIEW Note: • -XX and -X mean standardized parts, so • Color Indication of Appearance Parts they may have some difference from the Example: original one. KNOB, BALANCE (WHITE) . . . (RED) ↑ ↑ • Items marked “*” are not stocked since they are seldom required for routine ser- Parts Color Cabinet’s Color...

  • Page 42: Electrical Parts List

    HS-MB1 SECTION 6 MAIN ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS When indicating parts by reference num- uF: μF the parts list may be different from the ber, please include the board. parts specifi ed in the diagrams or the com- •...
  • Page 43 HS-MB1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2918 1-100-597-11 CERAMIC CHIP 0.1uF C2978 1-126-197-11 ELECT CHIP 10uF C2919 1-126-197-11 ELECT CHIP 10uF C2979 1-126-197-11 ELECT CHIP 10uF C2920 1-126-933-11 ELECT 100uF C2980 1-100-597-11 CERAMIC CHIP 0.1uF...
  • Page 44 HS-MB1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > J2102 1-793-459-11 JACK, DC (POLARITY UNIFIED TYPE) (DC IN 10V) CN2131 1-816-587-21 PIN, CONNECTOR (PC BOARD) 15P J2103 1-779-745-41 JACK, DC (DC IN ZONE 1 19.5V)
  • Page 45 HS-MB1 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2307 1-211-986-11 METAL CHIP 0.5% 1/10W R2713 1-216-833-11 METAL CHIP 1/10W R2308 1-216-864-11 SHORT CHIP R2714 1-216-851-11 METAL CHIP 330K 1/10W R2309 1-211-986-11 METAL CHIP 0.5%...
  • Page 46 HS-MB1 MAIN VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2921 1-165-884-11 CERAMIC CHIP 2.2uF 6.3V R3100 1-216-833-11 METAL CHIP 1/10W R2922 1-165-884-11 CERAMIC CHIP 2.2uF 6.3V R3101 1-216-833-11 METAL CHIP 1/10W R2923 1-216-833-11 METAL CHIP...
  • Page 47 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C112 1-107-826-11 CERAMIC CHIP 0.1uF C345 1-107-726-11 CERAMIC CHIP 0.01uF C113 1-117-720-11 CERAMIC CHIP 4.7uF C347 1-115-339-11 CERAMIC CHIP 0.1uF C114 1-107-826-11 CERAMIC CHIP 0.1uF C348 1-115-339-11 CERAMIC CHIP 0.1uF...
  • Page 48 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C581 1-128-991-21 ELECT CHIP 10uF C749 1-107-826-11 CERAMIC CHIP 0.1uF C582 1-107-826-11 CERAMIC CHIP 0.1uF C750 1-107-826-11 CERAMIC CHIP 0.1uF C585 1-107-826-11 CERAMIC CHIP 0.1uF C754...
  • Page 49 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1131 1-107-826-11 CERAMIC CHIP 0.1uF CN1106 1-822-120-11 JACK, MODULAR 8P (INPUT SOURCE 2 D) C1142 1-162-964-11 CERAMIC CHIP 0.001uF CN1107 1-822-120-11 JACK, MODULAR 8P (INPUT SOURCE 3 D)
  • Page 50 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D346 6-501-882-11 DIODE RB558WTL IC319 6-707-519-01 IC DS90LV012ATMF D347 6-501-882-11 DIODE RB558WTL IC500 6-711-267-01 IC FMS6501MSA28X D348 6-501-882-11 DIODE RB558WTL IC501 6-711-267-01 IC FMS6501MSA28X D349 6-501-882-11...
  • Page 51 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q703 8-729-027-56 TRANSISTOR DTC143TKA-T146 R134 1-216-833-11 METAL CHIP 1/10W Q704 8-729-027-56 TRANSISTOR DTC143TKA-T146 R135 1-216-805-11 METAL CHIP 1/10W Q705 8-729-027-56 TRANSISTOR DTC143TKA-T146 R136 1-216-809-11 METAL CHIP...
  • Page 52 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R202 1-216-845-11 METAL CHIP 100K 1/10W R445 1-216-825-11 METAL CHIP 2.2K 1/10W R203 1-216-813-11 METAL CHIP 1/10W R446 1-216-864-11 SHORT CHIP R204 1-216-833-11 METAL CHIP 1/10W...
  • Page 53 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R525 1-211-990-11 METAL CHIP 0.5% 1/10W R601 1-216-864-11 SHORT CHIP R526 1-211-990-11 METAL CHIP 0.5% 1/10W R602 1-216-864-11 SHORT CHIP R527 1-211-990-11 METAL CHIP 0.5% 1/10W...
  • Page 54 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R723 1-218-847-11 METAL CHIP 0.5% 1/10W R784 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R724 1-218-847-11 METAL CHIP 0.5% 1/10W R785 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W...
  • Page 55 HS-MB1 VIDEO Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R844 1-216-833-11 METAL CHIP 1/10W R1133 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R845 1-216-833-11 METAL CHIP 1/10W R1135 1-218-867-11 METAL CHIP 6.8K 0.5% 1/10W R846 1-216-833-11...
  • Page 56 HS-MB1 VIDEO Ref. No. Part No. Description Remark R1211 1-216-833-11 METAL CHIP 1/10W R1212 1-216-864-11 SHORT CHIP R1213 1-216-864-11 SHORT CHIP R1214 1-216-833-11 METAL CHIP 1/10W R1215 1-216-833-11 METAL CHIP 1/10W R1216 1-216-864-11 SHORT CHIP R1217 1-216-864-11 SHORT CHIP < SWITCH >...
  • Page 57 HS-MB1 MEMO...
  • Page 58 HS-MB1 REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2009.02...

Table of Contents