Asus MW203, MW203-D - Mouse Manual

Your package includes

1. MW203 Mouse
2. Nano USB 2.4GHz receiver (Dongle)
3. 1 x AA battery
4. Quick Start Guide
5. Warranty Card

Button functions

1. Left button: Left-click
2. Right button: Right-click
3. Scroll wheel: Scroll up/down and middle-click
4. DPI switch button: 1000 / 1600 / 2400
5. Left side upper button: Forward (Internet)
6. Left side lower button: Backward (Internet)
7. Connection channel indicator
   1: 2.4GHz
   2/3: Bluetooth
8. Connection mode switch
9. Pairing/Connection button
10. ON/OFF switch

Miscellaneous

11. Receiver slot
12. Low battery indicator/DPI indicator

Specifications

Dimensions
Mouse: 105.65mm (L) x 80.17mm (W) x 40.61mm(H)
Dongle: 18.53mm (L) x 14.50mm (W) x 6.20mm (H)
Weight
Mouse: 96g (with battery) / Dongle: 2.0g
Rating
Mouse: 2.4GHz mode: 1.5V/5.4mA Bluetooth 3.0 mode: 1.5V/7.7mA Bluetooth 5.0 mode: 1.5V/5.7mA
Dongle: 5V/25mA
Frequency Band
Mouse: (GFSK) 2403~ 2480MHz
Dongle: (GFSK) 2403~ 2480MHz
Maximum output power
Mouse: GFSK: 0 dbm / Bluetooth: 0 dbm
Dongle: GFSK: 2 dbm
Hardware Version
Mouse: GFSK / Bluetooth: V1.0
Dongle: GFSK: V1.0
Software Version
Mouse: GFSK / Bluetooth: V1.0
Dongle: GFSK: V1.0

Connecting to PC

Via 2.4GHz:

1. Slide the power switch to ON.
2. Insert the Nano USB receiver into an available USB port on your PC.
3. Press the Connection mode switch button to channel 1 (2.4GHz).
4. When successfully paired to your PC, the Connection channel indicator LED 1 will light up and then turn off.

Via Bluetooth:

1. Slide the power switch to ON.
2. Press the Connection mode switch button to Bluetooth mode 2 or 3, and then long press the Connect button for over 3 seconds to activate the Bluetooth pairing mode.
3. On Windows, right-click the Bluetooth icon on the right of the task bar (or double-click the Bluetooth icon in the Control Panel) with a mouse connected to your PC, and then click Add a device > MW203 Mouse_BT3.0 or MW203 Mouse_BT5.0 > Finish.
4. When done, the Connection channel indicator LED 2 or LED 3 will flash several times and then off. The mouse will connect to your PC automatically the next time you turn ON the mouse's power switch.
   NOTE: The mouse supports both Bluetooth 3.0 and Bluetooth 5.0.

Adjusting DPI

To change the DPI, press the DPI switch button.
Refer to the following for DPI indications:
1000 dpi: DPI indicator will flash once.
1600 dpi: DPI indicator will flash twice.
2400 dpi: DPI indicator will flash three times.

Low battery indicator

Please replace the battery when the low battery indicator beneath the scroll wheel flashes red 10 times, indicating that the mouse runs low on power. It's recommended that you pair the mouse to your PC via Bluetooth 5.0, which saves power and lengthens your battery life effectively.

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.